£7.88 exc vat
£9.46 inc vat
In stock
£7.88 exc vat
£9.46 inc vat
In stockRecommended usage 4 x C-21A1075 to fit one mini.
These Dunlop R7 165/70/10 radial tyres are a modern tyre with a 1960s style tread pattern very similar to the classic Dunlop Racing CR65 tyre. The perfect tyre for using with our classic Rose Petal alloys or Minilife.
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be u...
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by wheel sockets. This uses 17mm socket.
Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the longer version needed when using the wheels with the spacer, includes stainless steel washer. 32mm long.
these will fit MB split rims
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
55mm wide chrome centre cap with 40mm face with leyland "ST" logo centre as supplied on wheels This fits the ST Minispares Minator 5x10 and 6x10 8 spoke wheel, which have a flat fronted outer rim as per all the ST designs since 25/09/04 but now has a...
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
Wheel bolt for Minilites.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...
This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...
50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).
For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.
This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...
This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...
When the 12" steel wheel was introduced as standard in 1984 they changed the wheel nut seating angle to 60 degrees.
Green centre cap for 13" sportspack wheels with MINI word but interchanges with other genuine 12" and 13" Rover alloy wheel caps. Sold individually.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plasti...
Chrome Lug nut.
Fit stock 10" & 12" wheels. Also fits Minator and other Mag wheels that take a radius seat type nut.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.