£5.21 exc vat
£6.25 inc vat
Out of stock
these will fit MB split rims
£5.21 exc vat
£6.25 inc vat
Out of stock
These Dunlop R7 165/70/10 radial tyres are a modern tyre with a 1960s style tread pattern very similar to the classic Dunlop Racing CR65 tyre. The perfect tyre for using with our classic Rose Petal alloys or Minilife.
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...
Wheel bolt for Minilites.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...
Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...
Wheel spacer for our Rosepetal alloy wheel, see C-21A1071 for more info.
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be u...
For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.
This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.
52mm centre cap for 12" and 13" alloy genuine Rover wheels, this has the Cooper Laurel design. Sold individually.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plastic cap Sticker 50mm Model
This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...
These Dunlop R7 165/70/10 radial tyres are a modern tyre with a 1960s style tread pattern very similar to the classic Dunlop Racing CR65 tyre. The perfect tyre for using with our classic Rose Petal alloys or Minilife.
Genuine Mini Spares Rose Petal from our own tooling for race quality use,
"Rose Petal" 4.75" x 10" matt black alloy"-
A faithful reproduction of the classic 1960's wheel produced in conjunction with Swiftune on our own tooling using...
Silver 4.5x10" Cooper S steel replica road wheel.
These wheels were a factory-fitted option on the Mk1, Mk2 and Mk3 Cooper S. Finished in Old English White on Mk1 cars - see 21A1286WHITE and Dover Grey(GR34) on Mk2 and Mk3. Hubc...
Yokohama's ultimate in 10" tyre performance, the A032-R Aqua Tusk tyres feature a soft compound rubber and aggressive tread pattern for utlimate grip and high speed stability.
These are DOT approved, road legal competition and per...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.