£1.92 exc vat
£2.30 inc vat
In stock
16.9mm Shank diameter
34.7mm Shank depth
3.7mm Washer thickness
£1.92 exc vat
£2.30 inc vat
In stockRecommended usage 16 x REV10 to fit one mini.
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
For the latest 10" Revolution wheels with a 61mm centre cap introduced on 2004
For the latest 12" Revolution whels with a 67mm centre cap introduced on 2004
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Stainless steel sleeve nut with tapered washer.
5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.
The best reason for buying our wheels is that spare ...
Genuine revolution centre cap for RFX 12" wheel only with 55mm hole.
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
Wheel bolt for Minilites.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...
Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...
This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...
50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).
For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.
This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems.
Lug nuts. 15.75mm wide shank 21.5mm long shank length and overall length of...
last few-Original minilife black on white 49.7mm(50mm) wide sticker for the old centre caps which have now been changed to C-21A1962 alloy cap with ST decal size of 50mm.For "ST" stick on badge see[linkSTICKER25[/link]
The new p...
Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".
Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.
Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not a multi sided socket to avoid damaging the wheel nut. Original nuts from the factory u...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.