£14.85 exc vat
£17.82 inc vat
In stock
The type with a dimple on top is NLA and this was Rovers replacement which is expensive so see our 500929MS or 17H5143 for better options and both fit perfectly. The dimple type was dropped By Rover.
The difference was the the screw locating hole at the bottom was in a different position and the black dimple type was relocated to be at the top.
Some models did not have the black dimple and were plain exactly as this item.
Owing to the expense of these rims we advise fitting our 2 alternatives. On Keith Dodd's twin point we fitted the 500929MS which looks better and is what Minispares recommend. All headlamp rims are supplied and priced as a single item, please order 2 for a pair.
£14.85 exc vat
£17.82 inc vat
In stockRecommended usage 2 x DHF100060 to fit one mini.
Almost any screw will hold the chrome headlamp bezel on, but only one is correct! These screws are stainless steel and will never corrode plus they have the little rubber washer on the backside so that the screw will not fall out when trying to fit ...
Made in the UK. Correct fitting stainless steel type with screw and washer at a special low price for any Lucas or Wipac headlight including injection cars.
A headlight trim ring is only the starting point of a good looking car, but you have...
The best chrome type available with screw and washer.
A headlight trim ring is only the starting point of a good looking car, but you have to start somewhere. Sold singly 2 required per car. These are the original type chrome over solid bras...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Minispares 2 piece plastic roof moulding kit specially shaped for the corners and drain holes as fitted from 1980on in black.
The 2 joining and finishing clips are DBE10006PMD which need to be ordered seperately. The last Rover...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
Original MK1/2 shape with correct 1.25" small neck.
Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.
The original part number for the Winguard MK1 bottle was ADA383...
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
Pair of Genuine Mini Spares original type black plastic mirrors fitted as standard from 1980 and have been supplied by us since 2015 when Rover ceased production.
These mirrors are denoted by being supplied with a slightly different shape b...
Plastic cover for JPC9849MS mirror stem--this will fit original Rover mirrors which are obsolete but is a slightly different shape
This is the L/H blanking plug in the base of the factory type fitted plastic door mirrors JPC9848...
Original fitment L/H mirror with old english white backing and is the only painted mirror currently in production.See GS25320 for matching pair
Original fitment R/H mirror with old english white backing and is the only painted mirror currently in production.See GS25320 for matching pair
Plastic cover for JPC9848MS mirror stem. This will fit original Rover mirrors which are obsolete but is a slightly different shape.
This is the R/H blanking plug in the base of the factory type fitted plastic door mirrors JPC984...
Mini Clubman front bumper, a very good copy produced from new tooling in a high quality chrome finish.
Remember-all chrome needs regular washing and cleaning as atmospheric filth contaminates modern day chrome,
For rear bumper see ...
Chrome on plastic, slightly fatter than the original black plastic mirror fitted from 1980 on. This is an ideal cheaper replacement mirror for JPC9849 L/H as fitted by Rover from 1980 on.
Chrome on plastic. Slightly fatter than the original black plastic mirror fitted from 1980 on this is an ideal cheaper replacement mirror for JPC9848 R/H as fitted by Rover from 1980 on.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.