RIVET FOR SPORTSPACK WHEEL ARCH
RY612535

£0.55 exc vat

£0.66 inc vat

In stockIn stock
Rivet suitable for Sportspack wheel arches, also can be used to rivet headlamp bowls to wings.



4.8mm x 21mm

£0.55 exc vat

£0.66 inc vat

In stockIn stock

Recommended usage 4 x RY612535 to fit one mini.
Wheel Arches and Mouldings - Qty 4

People also bought products

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

Stainless steel stud for original production factory fitted sports pack arches.

These use FN105047 nuts.

New genuine arches now have an upgraded threaded brass insert and now use a stud ZUA000250.

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

Pop rivet for fixing the headlamp bowl to the wing. Great for MS14 metal bowl but be careful if using on plastic bowls

Rivet for the CP343 engine number plate-2 required.

5/16" UNF A2 Stainless Steel Plain nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

Screw for holding PRC1230A to the number plate light body, 1970 onwards.

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

Short diff housing bolt fitted to Rod change gearbox only 3/8"unc and 3"long. For the 2 long bolts useTAM1617. UNC course thread for case end and UNF for the nuts. All sold singly per item

53K266 are 4.5" long -4 f...

Clip for underside of front floor(3 per side) 6 in total fitted to 90

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

This is the small plastic nut used to hold the fuel line protector shield on later cars, also used to hold the catalytic converter heat shield on, 4 required for each shield.

Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)

Metric M6 PLAIN NUT.sold singly per item

Required for non genuine stainless steel and chrome bumpers.

Fits radiators with metric fittings such as ARP1110

Shakeproof star washer 3/16"unf sold individually-order quantity as required