PLASTIC NUT FOR FUEL LINE PROTECTOR AND CAT HEATSH...
EYH10001

£1.07 exc vat

£1.28 inc vat

In stockIn stock
This is the small plastic nut used to hold the fuel line protector shield on later cars, also used to hold the catalytic converter heat shield on, 4 required for each shield.

£1.07 exc vat

£1.28 inc vat

In stockIn stock

Recommended usage 4 x EYH10001 to fit one mini.
Fuel rails and pipes - Qty 4
Exhausts for 998cc with HS4 and Cooper 1275 cc wit - Qty 4
1275cc with HIF38 carburettor and open loop cataly - Qty 4
Exhausts for all injection cars - Qty 4

People also bought products
HEEL BOARD PIPE TAG TAB
BMP1496

Clip on heelboard for pipes-2 fitted on all models until SPI 1991 onwards which had one onlyMS51heel board panel has 2 fitted and HMP441008 has one only.

£1.20 exc vat

£1.44 inc vat
UNDER FLOOR CLIP FOR FUEL AND BRAKE PIPE TAG TAB
ALA5536

Clip for underside of front floor(3 per side) 6 in total fitted to 90

£3.25 exc vat

£3.90 inc vat
CLIP FOR 14A8009 MOULDING
14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

£1.22 exc vat

£1.46 inc vat
SCRIVET FOR SPORTSPACK WHEEL ARCHES
AWR2227A

The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.

£0.60 exc vat

£0.72 inc vat
WIPER WHEEL BOX BUSH MK3 KIT INNER &OUTER(CUT INNE...
37H7201MS

Black bushes for wiper wheelboxes. Sold as a wiper wheel box set(one above the windscreen scuttle cowl and one under the cowl), takes two sets per car.

To fit early Mk1/2 cars cut down the part that fits under the panel work part(this part h...

£7.00 exc vat

£8.40 inc vat
MK1 CHROME LOWER DOOR MOULDING CLIP
13H525

One of the distinguishing features of the Cooper S model was the chrome trim around the door windows. If yours is missing or mangled, it can now be replaced

(we won't ask for your car's pedigree if you're adding it to a non S door)!

£1.46 exc vat

£1.75 inc vat
CLIP FOR CENTRE BINNACLE FINISHER (14 REQUIRED)
14A9796

These are the little 'whisker clips' that hold the 14A9907 bezel on the front of the oval 3-instrument gauge pod 24A2702. The 'ears' slot into the back of the bezel and the tails that stick out go thru one of 14 holes in the...

£2.10 exc vat

£2.52 inc vat
MILD STEEL SEAM MOULDING CLIP
BMP128

These are the original Rover Xparts clips that hold on the vertical seam mouldings for all minis, prone to rust this was Rovers upgrade but Mini spares produced a stainless steel version BMP128MS which is also cheaper and a better option...

£0.50 exc vat

£0.60 inc vat
SEAT TRIM CLIPS WAS 14A4497
GHF1500

Also used for other trim areas this clip holds the vinyl or fabric of the seat covers to the metal framework.This part has larger D shape and claw spikes but if you want the smaller D shape and claws for headlining and rear seat covers see[link]14A80...

£0.15 exc vat

£0.18 inc vat
BATTERY COVER RUBBER RESTRAINING STRAP
14A7776

Your battery box 5L877 should be held in place by this rubber strap.

£8.00 exc vat

£9.60 inc vat
SEAM MOULDING CLIP
GFK7515

Zinc plated mild steel clip for fixing vertical seam mouldings to the body.

£0.12 exc vat

£0.14 inc vat
INTERIOR DOOR PANEL TRIM CLIP
GFK7509

This plastic clip was commonly used by Rover for all car trimming and first found its way on the wind up window version mini door panel.9 per side but always purchase a spare in case of breakages.

£0.25 exc vat

£0.30 inc vat
BADGE SPIRE CLIP FOR 24A72
PFR108

Clip for 24A72 Mk1 bonnet badge.

£0.17 exc vat

£0.20 inc vat
BOOT LID SEAL CLIP FOR 14A6584 (26 REQUIRED)
14A6585

Used on all MK1/2/3 bootlids where there are 26 little holes drilled around the inner edge. These are for use with 14A6585 seal--- Later cars 1988 on fitted a seal to the body only (cke10018).

£0.45 exc vat

£0.54 inc vat
SEAM MOULDING CLIP STAINLESS STEEL
BMP128MS

These are the clips that hold on the vertical seam mouldings on all minis.

The original metal type are prone to rust so Mini spares producedd these stainless steel versions which are also cheaper. Supplied as a single clip, order as many as ...

£0.28 exc vat

£0.34 inc vat
HEADLINING AND SEAT COVER CLIP SET (20 per set)
C707

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

£4.96 exc vat

£5.95 inc vat
BONNET PROP METAL CLIP
CZH209

The metal clip that holds the bonnet prop to the bonnet.

£6.84 exc vat

£8.21 inc vat
HEADLINING AND REAR SEAT COVER CLIP
14A8094

This universal trim clip with smaller D shape and exta short claws section is for rear seat and for headlings. For MK1/2 minis and Traveller/Estate versions there are 25 and MK3 on there are 13.

For the clip with a larger D and claw spike se...

£0.27 exc vat

£0.32 inc vat
DISTRIBUTOR SHIELD BLACK CLIP
13H6461

Each clip kit has 3 parts, clip, spacer and turnbutton. Each kit sold separately and 3 kits per car are required.Now in black to match shield and not show dirt or grease

This is the button with a spade on the end which often breaks, which ho...

£1.75 exc vat

£2.10 inc vat
CIRCLIP FOR REAR STUB AXLE
2A7352

heavy duty circlip on the rear radius arm stub axle to hold it in position

£3.50 exc vat

£4.20 inc vat