PACKING WASHER FOR FAM2764 BUMPSTOP
FAM2767

£2.93 exc vat

£3.52 inc vat

In stockIn stock
this is the packing washer that sits on the FAM2764 single bolt front suspension bump stop from 1976 on. Sold singly

£2.93 exc vat

£3.52 inc vat

In stockIn stock

Recommended usage 2 x FAM2767 to fit one mini.
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 2
Front Suspension - Qty 2

People also bought products

KAD Rear Anti Roll Bar for Classic Mini.



The Mini with a high roll centre benefits from the fitment of anti-roll bars to control unwanted body roll. KAD Anti Roll Bars help to prevent body roll without having to fit or adjust shock...

Set of 4 High quality Japanese sealed ball joints.



Developed and tested over a period of three years, the original concept was to manufacture a high quality product, similar to those used on modern vehicles. Unlike the current des...

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Lightweight drilled version of 21A2596. This bolt is drilled all the way through to allow easy adjustment of Hilos.

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis up to 1976 on but the later kit MS41 will fit early...

Mini Spares product,metal trunnion to hold the 2-2A5818MS bushes on the rear subframe.

Originally there were 4 of these trunnions on the subframe but in 1976 (MK4)the front 2 brackets were strenghened and enlarged to [link]21A2...

Mini spares product.In 1976 Rover started fitting this larger metal trunnion to the front of the rear subframe which only used one single large bush 21A2560.

2 required per car but sold singly

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

Standard gas filled replacement front shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

Fast Road Gmax gas filled rear shock absorber (sold individually). Only for lowered cars.

Fast Road Gmax gas filled front shock absorber (sold individually). Only for lowered cars.

Probably the best road performance dampers ever made but very expensive, these are road fitting rear type. Sold Individually but recommend fitting in pairs.