METAL WASHER FOR CENTRE BOLT.SUBFRAME TOWER 1976 O...

fitted from 1976 on rubber mounted subframes this washer goes on the large single tower bolt on the front subframe---fits on top of the standard original rubber seal KGE100050 to stop damage

£1.28 exc vat

£1.54 inc vat

HILO HEXAGONAL ADJUSTING BAR FRONT (SHORT)

HILO-02

Piece of hexagonal rod 40cm long to fit the hilo for adjusting in the original method before the adjusting nuts were fitted. Not always neccessary to use.

£6.00 exc vat

£7.20 inc vat

SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS

HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

£37.65 exc vat

£45.18 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS44BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

£5.92 exc vat

£7.10 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS43BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

£6.28 exc vat

£7.54 inc vat

CAMBER AND TOE REAR TRACK ADJUSTMENT BRACKETS

MS73EVO

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

£37.80 exc vat

£45.36 inc vat

FRONT SUBFRAME TO BODY SPACER PRE 1976 DRY ONLY

21A2341

This is the metal packing piece for the twin bolt pre 76 front dry subframe tower mount.

£6.00 exc vat

£7.20 inc vat

SUBFRAME TOWER IMPROVEMENT KIT FOR FRONT SUBFRAME

C-STR640A

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

£15.81 exc vat

£18.97 inc vat

FRONT SUBFRAME POLY MOUNT KIT 1976 ON

C-STR643

This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.

It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.

£16.00 exc vat

£19.20 inc vat

SUBFRAME MOUNTING FRONT ALLOY TEARDROP FOR FRONT (...

C-STR641

To compliment the top alloy blocks (C-STR640), those troublesome front rubber mountings can be replaced by alloy cast mountings which will not break and further enhance roadholding. These are for the front of the front subframe on vehicles built from...

£17.00 exc vat

£20.40 inc vat

SUBFRAME TOWER MOUNT ALLOY KIT FOR FRONT SUBFRAME

C-STR640

The set of four aluminum top front subframe mountings are to replace the standard rubbers fitted on vehicles from 1976 to present date. These alloy pads help reduce subframe movement, which is detrimental to handling when driven hard. As the original...

£17.50 exc vat

£21.00 inc vat

DOOR SEAL MK3 WIND UP WINDOW TO 1996

CGA2835MS

Genuine correct length with cut outs and drain holes in the correct places.

The MK3 door seal is notable because of it's large 'bulb' area. The 'bulb' is the round section that the door closes against. The size is determined by how much gap ...

£11.90 exc vat

£14.28 inc vat

REAR SUBFRAME COMPETITION POLY BUSH SET (4 SMALL)

C-STR638

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

£11.88 exc vat

£14.26 inc vat

COMPETITION REAR SUBFRAME BUSH 2x HARDER 21A2560 B...

C-STR639

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 used the same bush 2A5818(C-STR638) at the front and rear of the subframe, ...

£8.34 exc vat

£10.01 inc vat

REAR SUBFRAME SUPPORT PIN. NON GENUINE

21A1440MS

Mini Spares product is a better quality pin-Please note that only the pin is supplied. Please see 2A5818MS for the bushes.

2 required per car

£6.70 exc vat

£8.04 inc vat

SUBFRAME REAR LOWER METAL BRACKETS FOR FRONT SUBFR...

C-STR642

Rear solid brackets for the front subframe of post 1976 models, ideal for racing or road if noise is not important. But very important if you are after the ultimate handling! we have tried the poly type but they were not as successful.

£13.50 exc vat

£16.20 inc vat

REAR SUBFRAME BOLTS AND BUSHES ONLY FITTING KIT 19...

MS43

Every nut, washer, bolt, rubber bush and 2 pins that hold the rubber bushes that are prone to rusting badly and are required every time you do a subframe change. Including the 2 large penny washers this kit has 36 components. Other companies offer l...

£26.25 exc vat

£31.50 inc vat

TOWING EYE BOLT (FOR ROPE USE ONLY)

21A1241

Towing eye that fits in place of the bolt holding the front panel to the subframe. For stronger later version see KPU100160.

When using certain accessory tow bars make sure the towing eye is in the right position to suit or it w...

£5.85 exc vat

£7.02 inc vat

MINI BOOT CABLE FITTING KIT INCLUDING SPACERS

14A6740FK

£4.50 exc vat

£5.40 inc vat

CROWNWHEEL BOLT FOR LSD TYPE CROWNWHEELS

C-BTA1254

Competition crownwheel bolt for use with our LSD crownwheels, these are CNC machined from EN24T with a reduced head height for more gearbox clearance.

£5.10 exc vat

£6.12 inc vat

PETROL TANK STRAP RETAINING BOLT