REAR SUBFRAME COMPETITION POLY BUSH SET (4 SMALL)
C-STR638

£11.88 exc vat

£14.26 inc vat

In stockIn stock
The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

£11.88 exc vat

£14.26 inc vat

In stockIn stock

Recommended usage 2 x C-STR638 to fit one mini.
Rear Subframe - Qty 1

Recommended products

Mini Spares product is a better quality pin-Please note that only the pin is supplied. Please see 2A5818MS for the bushes.

2 required per car

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 used the same bush 2A5818(C-STR638) at the front and rear of the subframe, ...

This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.

Front subframe to front teardrop mounting, clutch case to block.

Engine mounting to subframe - easier to use than the GFK5184 - 3/4" long

Original pin that the rear subframe bushes sit on inside the trunnions on the rear subframe of every mini ever made. See {link}21A1440MS[/link] for Mini Spares better quality item

People also bought products

Introducing the Classic Mini CST Rear Tow Eye, a tough hook which is laser cut from 5mm thick 304 stainless steel and then coated with a slight chrome finish. This means it’s not only strong and durable but also sleek and precise.



...

Lightened and strengthened dry rear subframe for competition use. No radius arm brackets included as most will be replaced for adjustable brackets.

Lightweight drilled version of 21A2596. This bolt is drilled all the way through to allow easy adjustment of Hilos.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

Front subframe fitting kit for pre 76 twin bolt subframes, locktabs are included but not the subframe tower spacers as these rarely need changing.

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis up to 1976 on but the later kit MS41 will fit early...

Mini spares product.In 1976 Rover started fitting this larger metal trunnion to the front of the rear subframe which only used one single large bush 21A2560.

2 required per car but sold singly

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

Powder coated finish for longevity and looks. Don't forget to renew the bushes and bolts. These are pre 1990 Non Genuine subframes without the prongs for the later rubber exhaust. Adaptor brackets are available as C-ARA670/1 to enable fitment of late...

This is the metal packing piece for the twin bolt pre 76 front dry subframe tower mount.

These are non genuine pattern subframes, See 21A2160 for genuine

for hydrolastic suspension type saloon cars only. Please note these do not come with the hydrogas retainers, you will need to weld the old ones in or fabricate som...

Genuine rear subframe with exhaust rear hanger rods as fitted from 1991 on.

This part number replaces KHB10023 and for a strengthened subframe for the sportspack or any 13" wheel car-see KHB100590 or MS45LATE. MS45L...

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

Original pin that the rear subframe bushes sit on inside the trunnions on the rear subframe of every mini ever made. See {link}21A1440MS[/link] for Mini Spares better quality item

Rear subframe from original tooling as made for the factory but only with early

fixtures for hanging the exhaust (ie not the rubber hanger type from 1990 on)

but you can overcome this by using RC40 fitting kit as per or...

E coated Mini Spares product. Have a look at your subframe because if it looks bad then you need a new one for your MOT. Don't forget to renew the bushes and bolts.If you have the 1991 on type with mounting prongs for the exhaust rubber straps then y...