HEAVY DUTY REAR TOW HOOK
MSA4002

£28.50 exc vat

£34.20 inc vat

In stockIn stock
Introducing the Classic Mini CST Rear Tow Eye, a tough hook which is laser cut from 5mm thick 304 stainless steel and then coated with a slight chrome finish. This means it’s not only strong and durable but also sleek and precise.



...

£28.50 exc vat

£34.20 inc vat

In stockIn stock

Recommended usage x MSA4002 to fit one mini.

People also bought products

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

Best to buy with 1 x PWZ207, 1 x GFK1115, 1 x GFK1126, 1 x GFK5195 to allow correct fitment. 3/8" bolt and washers except for PWZ207 which has 7/17" hole.

These are superior to...

Boot hinge gaskets and fittings for original type hinges

Fluted type equivalent of GZF105A. This is equivalent

design of CZH4316 which was fitted between mini special black arches. Sold per side.

This is the guide plate for the bonnet locking pin, now in stainless steel.

Battery strap metal clip that is bolted to boot floor, now in stainless steel to help stop corrosion. Later cars had a captive nut in the boot floor, if you have an early car or the nut has corroded use GFK3212SS to secure the bolt.

Blanking plate on bulkhead with one holes for 1/2" heater hose

ALA7530 with 2 holes

ALA6592 with one hole

ALA6593 blank

Blank plate on bulkhead with no holes for heater hoses

ALA7530 with 2 holes

ALA6592 with one hole

ALA6593 with no holes

Plate on bulkhead with 2 holes for heater hose-Minispares make 3 types

ALA7530 with holes

ALA6592 with one hole

ALA6593 blank

HMP441017 - panel that can be either welded or bolted into place on the bulkhead to replicate the original rotodip piercing.



Very handy for historic appendix k spec cars or owners with Weber air boxes worried about cur...

The original shape air vent used by Austin/Morris/Leyland on the Mini Van,Pick Up and other commercial vehicles with pop up lid-VERY GOOD COPY BUT NOT GENUINE.



known as a 'pie vent' as they where used on 'meals on wheels' vans.

In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.

Bracket on the crossmember that holds the seat.

2 required per seat.

The black windsreen and backlight rubber fillet. Chrome is more popular however.

A single length for a single screen is 37H8052

MK3 body seal kit kit includes w/screen rubber CZH1719MS, rear screen rubber JRC2674, 2 chrome inserts 24A1466MS,2 EAM7724 rear opening window seals and 2 CGA2835MS door seals

Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.