£261.00 exc vat
£313.20 inc vat
Out of stock
Will fit earlier cars with old type rubber exhaust mounting blocks but for early original type see MS45D. For hydrolastic see MS45H.
Do not forget to get new rubber, bushes etc see MS43 or MS44.
This subframe is also suitable for MPI or any car with 13" wheels as designed by Rover, with reinforcements tabs on the cone spring seating platforms.
For genuine MPI with 13" wheels subframe see KHB100590.
Supplied in E-coat finish rather than transit primer.
£261.00 exc vat
£313.20 inc vat
Out of stock
2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.
Every nut, washer, bolt, rubber bush and 2 pins that hold the rubber bushes that are prone to rusting badly and are required every time you do a subframe change. Including the 2 large penny washers this kit has 36 components. Other companies offer l...
Fitted to the sportspack twin point injection cars from 1996 on as they required stiffening up for the 13" wheel option. See MS45LATE for E coated version which gives a better finish and longevity
The cone spring platform had 2...
Powder coated finish for longevity and looks. Don't forget to renew the bushes and bolts. These are 1990 on Non Genuine subframes with the prongs for the later rubber exhaust.
Lightened and strengthened dry rear subframe for competition use. No radius arm brackets included as most will be replaced for adjustable brackets.
Powder coated finish for longevity and looks. Don't forget to renew the bushes and bolts. These are pre 1990 Non Genuine subframes without the prongs for the later rubber exhaust. Adaptor brackets are available as C-ARA670/1 to enable fitment of late...
E coated Mini Spares product. Have a look at your subframe because if it looks bad then you need a new one for your MOT. Don't forget to renew the bushes and bolts.If you have the 1991 on type with mounting prongs for the exhaust rubber straps then y...
The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...
The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 used the same bush 2A5818(C-STR638) at the front and rear of the subframe, ...
This is the front bracket welded to the rear subframe to hold the rubber exhaust straps that cars from 1991 had as standard
This is the rear bracket welded to the rear subframe for the later rubber strap mounted exhasts from late 1991 on use
Front subframe fitting kit for pre 76 twin bolt subframes, locktabs are included but not the subframe tower spacers as these rarely need changing.
Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.
This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.
It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.
Minis Spares product to a slightly higher modern day shore hardness and texture soecification.
Pre 1976 used 8 of these bushes for the trunnions on the rear subframe but from (MK4)1976 on Rover reduced the quantity to 4 and used 2 larger bus...
complete kit of bushes and bolts for pre 1976 rear subframes when 8 rubber bushes the same size are used--for cars after 1976 with 4 small and 2 large rubber bushes use MS43
Rubber mounts are made in the UK.
ALLOY EXTENSION FOR C-AJJ3320/1 WHICH PROTECTS DIFF HOUSING AND EXHAUST COLLECTOR.
Mini Spares product is a better quality pin-Please note that only the pin is supplied. Please see 2A5818MS for the bushes.
2 required per car
Mini Spares copy of the RAC/ Scottish works type-For serious off-road and rough stages, the only type to fit is the rounded sledge type front version, which helps ride the car over potentially damaging foreign bodies. Extra strengthening bar fits int...
The correct screw for holding the 2A4267MS bump stop for the upper arm on the front suspension. 3/16"unf 1/2"long flat head phillips type screw.
Quality UK made with laser cut out air vent holes. Since June 2014 they have been re-designed and made in Marine grade EN5083 grade alloy with improved hardness to fit Heritage and genuine subframes perfectly, it is paramount that that the gearbox cl...
Every nut, washer, bolt, rubber bush and 2 pins that hold the rubber bushes that are prone to rusting badly and are required every time you do a subframe change. Including the 2 large penny washers this kit has 36 components. Other companies offer l...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.