HORN HIGH TONE SINGLE FEED
GGE102

£11.85 exc vat

£14.22 inc vat

In stockIn stock
A working car horn is not only a necessity it is also a legal requirement in England and most other countries.This the single spade terminal with an open trumpet

£11.85 exc vat

£14.22 inc vat

In stockIn stock

Recommended usage 1 x GGE102 to fit one mini.
Horn & Windscreen Wiper - Qty 1
Horn and Alarm - Qty 1

Alternative products

A working car horn is not only a necessity it is also a legal requirement in England and most other countries.This the single spade terminal with an open trumpet

People also bought products

twin terminal horn with low tone and open trumpet design-often fitted with the hi tone version GGE164 to let people know you really are there.

All the horns we sell have a bracket on them but this is the original type from Rover.

A working car horn is not only a necessity it is also a legal requirement in England and most other countries.This the single spade terminal with an open trumpet

twin terminal horn with high tone and open trumpet design-often fitted with the low tone version GGE165 to let people know you really are there.

Horn push assembly for the Mk1 Morris Mini, Mk1 Morris Mini Cooper and Mk1 Morris Mini Cooper S.

For Austin cars, see 27H6943. This horn push assembly can also be supplied without a centre emblem, see 27H6945

Main wiring grommet that fits in the front parcel shelf. ID 12.5mm fits 35mm hole.

The smallest pre engaged starter motor available for the A series yet still producing 1.3KW of power! Ideal for race/tuned cars with high compression and cars that need more room for oil coolers etc. See GXE1004EVO for inertia.

Sports coil for ballast resistor type ignition.

Best internal parts tested and another intermotor top product.

Its not the name on the outside but whats on the inside which matters.

Original type coil bracket 12G29...

Pop rivet for fixing the headlamp bowl to the wing. Great for MS14 metal bowl but be careful if using on plastic bowls

This is the hazard switch repair plug for post 1976 rocker switches, pins supplied so you can wire accordingly.

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

Small battery cable retaining bracket bolted at the front of the engine for pre engaged manual cars approx 1985 onwards.

For modern day petrol, except 1275cc. See 37H8379MS for 1275cc.

After lengthy tests we have found nearly all vac units are not to the originals but with the change of added oxygenates to petrol in the 1980's and then ethanol in ...

3 piece braided/cloth wiring loom to suit 1964-1967 van, pickup and traveller models with ignition start switch.

Range of distributors with modern day curves specially built,programmed and tested for Mini Spares in UK.

Beware of the cheap China made units that we have tested and currently offered by other vendors that are poorly made with wrong setting...

original Lucas type RESIN BASED CONDENSER made for the 45/59D type distributor if you want a quality item rather than the cheaper inferior parts available. Filled with 3m of winding inside as per original Lucas but every copy analysed to date has ...

RESIN BASED CONDENSER as per the original Lucas type made for the 23/25D type distributor as fitted to original Cooper S or Racers who want a trusty part or where originality is required,with soldered wire connections and correctly made foot to sit ...

PVC loom for Portuguese built Mini Moke, comes complete front and rear.

NEGATIVE EARTH ONLY..45D electronic(contactless)Pre A plus distributor .

replaces 41824A and 41418 plus any 998/1098cc up to the changeover of A plus type distributors. For best performance and tune we advise our electronic evolution versio...