£12.61 exc vat
£15.13 inc vat
In stock
For originality see 17H2536 originally made by Winguard which had correct size smaller neck as fitted to the MK1/2.
A new stainless steel bracket to hold the bottle is also available as 37H9712 or for original brackets see 37H9712ORIGINAL.
£12.61 exc vat
£15.13 inc vat
In stockRecommended usage 1 x GWW918 to fit one mini.
This is the metal bracket that holds most round shaped windscreen washer bottles from the 1960s which was fitted to MGB, Sprite and Mini but was in a black painted finish which got tatty when rusting so we made them in stainless steel for long life. ...
Clear plastic windscreen tubing 1/8" bore size and sold per metre.
a copy of the original sticker for your windscreen washer bottle on MK1 cars.
Only one sticker required but sold on a reel of 3 as it is cheaper to make this way and you get spares for bottle as they get tainted
Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.
Have yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.
Original ty...
Original MK1/2 shape bracket for windscreen washer bottle.
Has yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833
Wire clips 37H9672 were used for MK1 -...
Original MK1/2 shape with correct 1.25" small neck.
Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.
The original part number for the Winguard MK1 bottle was ADA383...
Windscreen washer pump bracket for MK2 onwards cars with padded dash rail.
Rubber grommet/seal as supplied in GWW935 washer bottle, to seal to the pump.
Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.
Have yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.
Original ty...
Non return valve fitted from 1992 when the washer bottle is fitted in the boot.
Fitted in the engine compartment pre October 1988 until the introduction of GWW940 and in the boot from 1991 on. This large windshield washer plastic bottle was then moved to the boot area and mounts on the R/H rear wheel arch. Rectangu...
This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...
This is the metal bracket that holds most round shaped windscreen washer bottles from the 1960s which was fitted to MGB, Sprite and Mini but was in a black painted finish which got tatty when rusting so we made them in stainless steel for long life. ...
A pair of black wiper arm's for L/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
A pair of black wiper arm's for R/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
The wiper motor drives a rack inside the metal tube that fits beneath the dash of the Mini. The rack is very well protected inside the case, but the problem is that the tube is often bent and/or rusted. Our special kit supplies all 3 pieces and the s...
Pair of 11" HEAVY DUTY wiper arms and blades for LHD cars MK3 1970 on and will fit RHD MK1/2 cars. This is where the wipers park on the right hand side as you sit in the car.
Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.
This is where the wipers park on the left hand side as you sit in the car.
This complete kit of 11" HEAVY DUTY wiper chrome/stainless steel parts is for RHD MK1/2 and all L/H/D cars where the wipers park on the right hand side as you sit in the car, dispose the nuts as they will be the wrong type for mk1/2 which had 6 sides...
Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...
This is the spiral wound cable that is in the wiper rack tubes. It needs to be cut to length.
Total length uncut is 150cm.
For classic vehicles with self parking wipers.
We all love our classic vehicles and many of us use them all year round. This means facing the vagaries of the weather, and let’s face it, even summer weather is rarely as rain free as...
This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.