WASHER BOTTLE MINI (1983-1988 & 1992-2000) with ca...
GWW935

£27.00 exc vat

£32.40 inc vat

In stockIn stock
Fitted in the engine compartment pre October 1988 until the introduction of GWW940 and in the boot from 1991 on. This large windshield washer plastic bottle was then moved to the boot area and mounts on the R/H rear wheel arch. Rectangular in shape, this white bottle includes the cap but not the metal mounting bracket (CZG1496). Used on all injection cars in the boot and was originally fitted on the r/h front wing from 1983 until 1988 when the master cylinder was fitted with a servo which took up more room. Electric pump fits on this bottle, uses GWW975 cap. If you had a GWW940 bottle that fitted 1989-92 under the bonnet you will now have to use this with CZG1496 bracket and re-plumb the pipes to the boot. It uses the same pump.

£27.00 exc vat

£32.40 inc vat

In stockIn stock

Recommended usage 1 x GWW935 to fit one mini.
Windscreen Washer - Qty 1
Windscreen wipers and wash - Qty 1

Recommended products

This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...

People also bought products

Rubber grommet/seal as supplied in GWW935 washer bottle, to seal to the pump.

Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.

Have yours disappeared, or just disintegrated with age?

The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.

Original ty...

Introduced when GWW804 jets were first fitted in 1970 but also replaced original Tudor type in MK1/2 Tudor bottles, but can be used in any container to stop sludge in the bottle from contaminating the jets.GWW504 is the Wing...

Non return valve fitted from 1992 when the washer bottle is fitted in the boot.

Has your windscreen washer bottle disappeared, or just disintegrated with age? This plastic washer bottle for early Minis with the Tudor logo has a 2" neck size, with internal tube and non return valve.

For originality see 17H253...

This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...

If your washer botle is in the boot this is the pump fitted originally to twin points 1996 on. Now only available without all the wiring and you just plug your socket on your loom direct to the pump

A pair of black wiper arm's for L/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades

A pair of black wiper arm's for R/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...

The wiper motor drives a rack inside the metal tube that fits beneath the dash of the Mini. The rack is very well protected inside the case, but the problem is that the tube is often bent and/or rusted. Our special kit supplies all 3 pieces and the s...

Pair of 11" HEAVY DUTY wiper arms and blades for LHD cars MK3 1970 on and will fit RHD MK1/2 cars. This is where the wipers park on the right hand side as you sit in the car.

Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.

This is where the wipers park on the left hand side as you sit in the car.

This complete kit of 11" HEAVY DUTY wiper chrome/stainless steel parts is for RHD MK1/2 and all L/H/D cars where the wipers park on the right hand side as you sit in the car, dispose the nuts as they will be the wrong type for mk1/2 which had 6 sides...

Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...

This is the spiral wound cable that is in the wiper rack tubes. It needs to be cut to length.

Total length uncut is 150cm.

For classic vehicles with self parking wipers.



We all love our classic vehicles and many of us use them all year round. This means facing the vagaries of the weather, and let’s face it, even summer weather is rarely as rain free as...

This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...

6 sided chrome nut for MK1/2 wiper wheel boxes-This had a bycycle thread whereas the later MK3 had a metric thread and was 8 sided.

Also fitted Sprite MK1/2/3 Midget mk1/2 TR4/4A and TR5

Smarten up your car with these functional chrome windscreen washer jets,

which have twin nozzle outlets to dispense more water. Bolts on, complete jet sold individually. Later cars with D shape holes will need filing to fit.

These u...