Exhaust hanger clamp for 1.875" pipe.

For joining rear box to downpipe on RC40 and downpipe to manifold on RC40.

£0.75 exc vat

£0.90 inc vat

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat

MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES

C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat

CAST IRON MANIFOLD TO DOWNPIPE CLAMP

GEX7046CAST

Exhaust manifold to downpipe clamp. For 32mm o/d pipe size.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These cast clamps are the best style to use. A real piece of kit to use eradicating a multitude of likely p...

£7.20 exc vat

£8.64 inc vat

MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...

C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat

EXHAUST RC40 AND FITTING KIT PLUS EXHAUST MANIFOLD

RC40PACKAGE002

The famous RC40 mild steel exhaust and downpipe with a maniflow LCB plus the fitting kit for the exhaust system. There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using QL5000 type...

£159.98 exc vat

£191.98 inc vat

MANIFOLD GASKET FOR FUEL INJECTED CARS

GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.

...

£5.10 exc vat

£6.12 inc vat

MANIFOLD TO DOWNPIPE EXHAUST CLAMP

GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat

MANIFOLD CLAMP FLAT TYPE 48mm 1.875"

C-AHT121

For the medium bore Maniflow LCB Y piece or AN180V. 48mm ID

£4.50 exc vat

£5.40 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat

WASHER FOR MANIFOLD THICK TYPE

12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

£0.34 exc vat

£0.41 inc vat

MANIFLOW LCB ADAPTOR FOR FREEFLOW MANIFOLD

L71

This short pipe fits on the end of our freeflow manifols C-STR816 to give the overall length of an LCB when you have an exhaust system to fit that was made explicitly for LCB fitment.Total length is 300mm ID is 44mm OD is 48mm.

£6.66 exc vat

£7.99 inc vat

MANIFOLD CLAMP 1.5/8" LCB (1.625") FLAT TYPE

C-AHT97

This popular size clamp fits the y piece where it joins the manifold on all our standard long centre branch exhaust manifolds. Sold singly.

£5.04 exc vat

£6.05 inc vat

MANIFOLD GASKET INLET / EXHAUST

AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

£0.96 exc vat

£1.15 inc vat

MANIFOLD LINK PIPE WITH KNUCKLE FROM LCB TO CATALY...

C-AEG375

Link pipe for fitting between the LCB and the catalyst. It has a stainless steel knuckle joint to prolong life and give the flexibility required on the system to overcome damage. See also alternative RC40-016

Y piece replacemen...

£45.83 exc vat

£55.00 inc vat

INJECTION MANIFOLD DOWNPIPE STUD

TD108051A

Special length and thread pattern only for the exhaust manifold to downpipe of injection cars, see also FX108047 special nuts. Metric M8.

£2.56 exc vat

£3.07 inc vat

MANIFOLD NUT SHORT BRASS 5/16" UNF

GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat

BLANKING PLUG INLET MANIFOLD & CYL HEAD

ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

£3.57 exc vat

£4.28 inc vat

ALLOY WATER HEATED TORQUEMASTER INLET MANIFOLD HS4...

C-AHT770

Genuine mini Spares inlet manifold dyno tested and designed for our Stage one kit C-STN17. The single SU manifolds is developed to give maximum airflow and gas speed, yet fit all engines even if the standard air cleaner set-up is used. I...

£32.00 exc vat

£38.40 inc vat

CENTRE EXIT TWIN TAIL PIPE REAR BOX WITH ADAPTER

C-ARA350

1.75" Bore centre exit twin tail pipe maniflow rear box with adaptor to sleeve down to the standard mini 998cc type exhaust system.

£122.63 exc vat

£147.16 inc vat

POLYURETHANE REAR COTTON REEL EXHAUST MOUNT

GEX7251POLY

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required. This is a stronger poly version.

£2.70 exc vat

£3.24 inc vat

RC40 REAR TWIN BOX SYSTEM FROM CATALYST BACK

C-STR812

Rear RC-40 twin box system to fit catalyst for cars built late 1991 on SPI(not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a twin box system with a little throatier pleasing note, but a mu...

£67.34 exc vat

£80.81 inc vat

MANIFLOW CENTRE EXIT SINGLE BOX 1.75" BORE EXHAUST...

C-ARA332SB

1.75" bore single box, centre exit exhaust system. This exhaust system by Maniflow is straighter and louder than our RC40 system. Very high quality with a skid plate on the bottom of the silencer and a polished stainless tip. Suitable for use with an...

£90.63 exc vat

£108.76 inc vat