RC40 REAR TWIN BOX SYSTEM FROM CATALYST BACK
C-STR812

£67.34 exc vat

£80.81 inc vat

In stockIn stock
Rear RC-40 twin box system to fit catalyst for cars built late 1991 on SPI(not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a twin box system with a little throatier pleasing note, but a much better flowing efficient system. Oval rear and round centre silencers. A single box version is also available as C-STR811

£67.34 exc vat

£80.81 inc vat

In stockIn stock

Recommended usage 1 x C-STR812 to fit one mini.
Exhausts for 998cc with HS4 and Cooper 1275 cc wit - Qty 1
1275cc with HIF38 carburettor and open loop cataly - Qty 1
Exhausts for all injection cars - Qty 1

Recommended products
EXHAUST RUBBER MOUNTING FROM 1990 ON
DBP7104

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

£3.00 exc vat

£3.60 inc vat
GASKET FOR EXHAUST CATALYTIC CONVERTER
GEX7761

Metal gasket for the catalyst and is the same both ends for Cooper 1275CC RSP early cars, but only fitted on the front to later cars. If you cannot fit this gasket on the rear your car does not need one.

£0.67 exc vat

£0.80 inc vat
Alternative products
RC40 REAR BOX AND PIPE FROM CATALYST BACK
C-STR811

Rear RC-40 fitted with a pipe to bolt straight on to the catalyst for cars built late 1991 onwards (not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a single box system with a little throat...

£61.00 exc vat

£73.20 inc vat
People also bought products
EXHAUST TAILPIPE TRIM FOR VAN/ESTATE fits 45mm ID
RC40-005

Stainless steel tailpipe trim with hanger bracket designed for fitting to the tailpipe of RC40 rear box as an extension piece. This is part of our RC40PACKAGE015 kit for Van/Estate and Pickup exhaust system when a freeflow o...

£25.44 exc vat

£30.53 inc vat
RC40 SHORT DOWN PIPE FOR TWINBOX TO LCB MANIFOLD
RC40-002

LCB pipe for RC40 twin box.

This pipe is the correct length when using our range of standard bore LCB

such as C-AEG364 & C-AEG365.

1.750"OD

£9.98 exc vat

£11.98 inc vat
EXHAUST RC40 AND FITTING KIT PLUS EXHAUST MANIFOLD
RC40PACKAGE002

The famous RC40 mild steel exhaust and downpipe with a maniflow LCB plus the fitting kit for the exhaust system. There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using QL5000 type...

£159.98 exc vat

£191.98 inc vat
EXHAUST RC40 CLASSIC EXHAUST MILD STEEL AND FITTIN...
RC40PACKAGE001

Original side exit RC40 Std bore exhaust, LCB short downpipe and fitting kit.

This includes the short downpipe for use with the Long Centre Branch type manifold. Use manifold C-AEG365.

£73.31 exc vat

£87.97 inc vat
DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...
RC40-001

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

£8.88 exc vat

£10.66 inc vat
RC40 REAR BOX AND PIPE FROM CAT BACK IN STAINLESS ...
C-STR811S

Stainles Steel version of C-STR811 with hanger brackets fitted for the later type rubber straps.

Can also use RC40-051 and RC40-057 as an alternative

£125.49 exc vat

£150.59 inc vat
RC40 REAR BOX AND PIPE FROM CATALYST BACK
C-STR811

Rear RC-40 fitted with a pipe to bolt straight on to the catalyst for cars built late 1991 onwards (not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a single box system with a little throat...

£61.00 exc vat

£73.20 inc vat
MANIFLOW LCB ADAPTOR FOR FREEFLOW MANIFOLD
L71

This short pipe fits on the end of our freeflow manifols C-STR816 to give the overall length of an LCB when you have an exhaust system to fit that was made explicitly for LCB fitment.Total length is 300mm ID is 44mm OD is 48mm.

£6.66 exc vat

£7.99 inc vat
RC40 EXHAUST DOWNPIPE FREEFLOW MANIFOLD TO REAR BO...
AN180V

Copy of the original Cooper single rear box downpipe, this fits our freeflow manifold or can be shortened to fit an LCB when fitting the single rear box C-STR809 RC40 silencer.

A 3" longer version suitable for van/e...

£13.54 exc vat

£16.25 inc vat
RC40 CLASSIC REAR BOX ONLY
C-STR809

Rear RC40 mild steel silencer with stainless steel tailpipe. Can be used as a single box system with down pipe number AN180V for a little throatier note.

Cars with catalyst use with AN181T for 1275 Coo...

£35.46 exc vat

£42.55 inc vat
LINK PIPE TO REPLACE CATALYTIC CONVERTER
C-ARA664

If you wish to delete the catalyst (legal restrictions apply, so check to see if you are allowed) this pipe is specially made to replace it.

£32.99 exc vat

£39.59 inc vat
PIPE FROM CAT TO C-STR809 REAR SILENCER
AN181T

This is the pipe to fit to the catalyst to enable fitment of the single rear box C-STR809. A ready assembled single box unit from the catalyst back is available as C-STR811 but this has the later type hanger bracket mounts t...

£21.47 exc vat

£25.76 inc vat
CAST IRON MANIFOLD TO DOWNPIPE CLAMP
GEX7046CAST

Exhaust manifold to downpipe clamp. For 32mm o/d pipe size.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These cast clamps are the best style to use. A real piece of kit to use eradicating a multitude of likely p...

£7.20 exc vat

£8.64 inc vat
MINI MOKE EXHAUST EUROPEAN ADAPTER
L71MO

Adaptor to fit from Cooper Freeflow Manifold to link pipe to clear Rod change housing on Mini Mokes manufactured in Europe. 48mm bore.

£43.50 exc vat

£52.20 inc vat
CATALYTIC CONVERTER 1275cc 1990 ON EU MARKET(TUV A...
RV8009E

Identical to RV8009 catalytic converter however this has been type approved for use in the EU, TUV approved.



Will fit all mini models with a cat, if you require new bolts the part numbers is FB110351 and ...

£91.71 exc vat

£110.05 inc vat
CENTRE EXIT TWIN TAIL PIPE REAR BOX WITH ADAPTER
C-ARA350

1.75" Bore centre exit twin tail pipe maniflow rear box with adaptor to sleeve down to the standard mini 998cc type exhaust system.

£122.63 exc vat

£147.16 inc vat
POLYURETHANE REAR COTTON REEL EXHAUST MOUNT
GEX7251POLY

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required. This is a stronger poly version.

£2.70 exc vat

£3.24 inc vat
BLANKING PLUG FOR LAMBDA SENSOR HOLE
MYB100040

Blanking plug to blank of the Lambda sensor hole on all SPI/MPI models.

£2.63 exc vat

£3.16 inc vat
MANIFOLD LINK PIPE STAINLESS STEEL
RC40-016

Stainless steel link pipe between an LCB and catalyst.

This is an alternative to C-AEG375 and both types prolong life expectancy.

The C-AEG375 has a stainless steel ball joint which allows complete flexibil...

£26.00 exc vat

£31.20 inc vat
DOWNPIPES FOR COOPER HIF44 CARB ONLY 1990 ON
GEX12017

Downpipes only for HIF44 carb Coopers from 1990 on

many customers opt for C-AEG367 and C-AEG375 if retaing catalyst

£51.00 exc vat

£61.20 inc vat