£268.57 exc vat
£322.28 inc vat
In stock
Stainless steel automotive grade unlike the poor looking chrome set up imported by some and sold cheaply. The "Deluxe" models of all Minis included bumpers with these over-riders and corner bars. Our special kit is designed to provide you all the pieces; including, all the bits and the bumpers!
Includes two bumpers, the complete overider and corner bar set set all in stainless steel plus all the bits and pieces to mount the overiders.
Also if you want this original kit in stainless steel but less the bumpers order as kit MSSK025.
If fitting to later cars with a rear fog lamp you will need to reposition the lamp,for R/H/D cars see MSSK024
For MPI cars from 1997 on with 4 spotlamps you will require a different kit MSSK026 or a front kit only is MSSK027.
£268.57 exc vat
£322.28 inc vat
In stockRecommended usage 1 x MS25 to fit one mini.
Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.
If you have standard overiders see kit MSSK011.
Also known as the overrider corner bars, originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the left hand front. For twin point cars a sh...
Stainless steel with corner bar holes.
Any Mini with "corner bars" on the bumpers was probably considered a Deluxe model such as a Cooper S. If you want to restore your Deluxe or upgrade your standard you need these stainless steel bumpers w...
Also known as the overrider corner bars-originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the right hand front. For twin point cars a sh...
Original genuine shape, fitted to all the MK1 deluxe cars and Coopers these overriders are now made in stainless steel to prolong life. They have pre drilled recessed holes to accept stainless steel corner bars unlike overseas copies.
These...
Original genuine shape overrider corner bars-originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the right hand rear.
Overseas co...
Original genuine shape, fitted to all the MK1 deluxe cars and Coopers these overriders are now made in stainless steel to prolong life. They have pre drilled recessed holes to accept stainless steel corner bars unlike overseas copies.
These...
Original genuine shape overrider corner bars, originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the left hand rear.
Overseas co...
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.
Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
Original MK1/2 shape with correct 1.25" small neck.
Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.
The original part number for the Winguard MK1 bottle was ADA383...
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...
New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard Black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...
Pair of Genuine Mini Spares original type black plastic mirrors fitted as standard from 1980 and have been supplied by us since 2015 when Rover ceased production.
These mirrors are denoted by being supplied with a slightly different shape b...
GENUINE MINI SPARES PRODUCT supplied with a slightly different plastic base cover-see EAM4159.
This is the the only mirror available since Rover stopped supplies.
The best way to drive a Mini is very defensively and kno...
GENUINE MINI SPARES PRODUCT supplied with a slightly different plastic base cover-see EAM4159.
This is the only mirror available since Rover stopped supplies.
The best way to drive a Mini is very defensively and knowing...
Chrome on plastic, slightly fatter than the original black plastic mirror fitted from 1980 on. This is an ideal cheaper replacement mirror for JPC9849 L/H as fitted by Rover from 1980 on.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.