SLIDING WINDOW CATCH SET METAL
MSSK015METAL

£255.00 exc vat

£306.00 inc vat

In stockIn stock
Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

£255.00 exc vat

£306.00 inc vat

In stockIn stock

Recommended usage 1 x MSSK015METAL to fit one mini.

Alternative products
WINDOW CATCH PLASTIC SET
MSSK015

Sliding window Mini models all must now use these black plastic locks for the windows. Our special kit includes a complete set of all the pieces: 4 latches, rubber seals, screws and chrome nuts.This kit is a great saving over buying all the parts ind...

£69.10 exc vat

£82.92 inc vat
People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

£42.00 exc vat

£50.40 inc vat
RIVET CLIP UPPER DOOR MOULDING (BOTTOM)
13H744

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

£0.83 exc vat

£1.00 inc vat
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

£7.50 exc vat

£9.00 inc vat
STAINLESS STEEL GLASS WINDOW RAIL SUPPORT KIT WITH...
MSSK2105SS

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

£35.20 exc vat

£42.24 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

£29.52 exc vat

£35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

£0.90 exc vat

£1.08 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat
DOOR PLATE BUFFER SCREW ( SHORT )
CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

£0.28 exc vat

£0.34 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

£7.50 exc vat

£9.00 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

£2.60 exc vat

£3.12 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

£60.08 exc vat

£72.10 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

£3.50 exc vat

£4.20 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

£3.50 exc vat

£4.20 inc vat
DOOR UPPER WINDOW GLASS SEAL R/H GENUINE MINISPARE...
PAM3076

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

£12.54 exc vat

£15.05 inc vat
DOOR UPPER WINDOW GLASS SEAL L/H GENUINE MINISPARE...
PAM3077

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

£12.54 exc vat

£15.05 inc vat
DOOR MOULDINGS INNER PAIR OF EJU10003 PLUS CLIPS
MSSK2102

Genuine Mini Spares mouldings product as supplied to Rover.

These fit on the inside of the door as a draft excluder for the window, on all wind up window cars from 1970 on.

£25.44 exc vat

£30.53 inc vat
WEATHERSTRIP KIT L/H DOOR 3 PIECE MK1/2 WINDOWS
MSSK021

Sliding window type weatherstrip kit L/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder

£39.89 exc vat

£47.87 inc vat
DOOR HINGE PIN REPAIR KIT FOR 1 EXTERNAL HINGE ONL...
MS15

This kit contains one pin and one bush for repairing the external hinges on MK1/2 doors. If they are badly worn and you need Hinges see 14A6818/19/20/21.

If you require a new set of studs see 14A6818BOLT a complete car set in st...

£1.95 exc vat

£2.34 inc vat
DOOR HANDLE GASKET (SMALL) MK3
CZH1729

Genuine Mini Spares product.

This is the small gasket on the Mk3 wind up window door handle.

The larger one is ALA5795 and the boot lid uses a seal CZH1747.

£0.56 exc vat

£0.67 inc vat