3/8" 6 point shallow AF/Imperial Socket set



Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

1/2" hex key socket needed when using our upgraded crank pulley bolt C-AHT147, 1/2" drive.

CV fitting tool, designed to assist with the correct fitting of CV joints, wheel bearings or drive flanges, as specified in the Haynes workshop manual. The wheel bearing should be torqued to the specified setting using this washer, and then removed a...

Roll pin punch for removing RPS1416 roll pin from the gear selector mechanism.

Multi-Purpose LM2 Grease supplied in a 500G tub.

This grease is suitable for Wheel Bearings, Radius Arms, Upper arms, knuckle joint cups and other regular greasing points.

This new type suspension cone tool for removing or refitting the rubber suspension cone is METRIC thread only and improved by using a hex(allen)key to screw in and hold the centre spindle. There cannot be many cars left out there with the AF type th...

Small kit to help the removal of the usualy difficult to move brass bush in the external hinges (MK1/2/VAN/PICKUP)

Ingenius kit which allows you to see the colour of the combustion in the cylinder head chamber by virtue of a glass topped spark plug.This takes the guess work out of mixture adjustment as different fuel/air mixtures burn with different colours. A fu...

Every mini owner will require this 1.5" socket at some stage as it does the pre A plus flywheel bolt when changing the clutch and also the swivel pin retaining nuts on your hubs plus the mainshaft/pinion nut in the gearbox. 1/2" Drive.


...