EXTERNAL HINGE BUSH TOOL (REMOVES BUSH ONLY)

TOOL15

£4.65 exc vat

£5.58 inc vat

In stock

Small kit to help the removal of the usualy difficult to move brass bush in the external hinges (MK1/2/VAN/PICKUP)

£4.65 exc vat

£5.58 inc vat

In stock

Recommended usage 1 x TOOL15 to fit one mini.

Recommended products

DOOR GASKET EXTERNAL HINGE SMALL END ON A PANEL

BMP135

THIS IS THE SMALL DOOR HINGE GASKET ON THE A PANEL FOR SLIDING WINDOW TYPE DOORS.

£0.43 exc vat

£0.52 inc vat

DOOR GASKET EXTERNAL HINGE LARGE END ON DOOR

ALA7844

THIS IS THE LARGE GASKET THAT FITS BEHIND THE HINGE ON THE DOOR OF AN EXTERNAL

HINGE ON CARS WITH SLIDING WINDOWS SUCH AS MK1/2. SEE BMP135 FOR SMALL ONE.

£0.49 exc vat

£0.59 inc vat

HINGE PIN BUSH FOR EXTERNAL HINGE

37H3043

It is possible and almost easy to repair sagging Mkl Mini door hinges with this pin and bush kit. You don't even have to remove the hinges from the car. Once you have removed the original hinge pin you simply drill a hole in the front hinge half, pus...

£1.25 exc vat

£1.50 inc vat

HINGE PIN FOR EXTERNAL HINGE MK1/2

37H3044

It is possible and almost easy to repair sagging Mkl Mini door hinges . You don't even have to remove the hinges from the car. Once you have removed the original hinge pin you simply drill a hole in the front hinge half, push in the bush and reassemb...

£1.15 exc vat

£1.38 inc vat

DOOR HINGE PIN REPAIR KIT FOR 1 EXTERNAL HINGE ONL...

MS15

This kit contains one pin and one bush for repairing the external hinges on MK1/2 doors. If they are badly worn and you need Hinges see 14A6818/19/20/21.

If you require a new set of studs see 14A6818BOLT a complete car set in st...

£1.95 exc vat

£2.34 inc vat

People also bought products

MINI RADIUS ARM BUSH REMOVAL AND REAMING TOOL

TOOL33

Radius arm bearing removal, fitting and reaming tool fitted with a pilot to keep the reamer in line with the needle roller bearing. Full instructions supplied.

£127.50 exc vat

£153.00 inc vat

IMPERIAL/METRIC OFFSET FEELER GAUGE SET

TOOL30

Metric & Imperial offset feeler gauge set, ideal for setting tappet clearnace, primary gear end float etc. Offset for ease of use.

Imperial: .005/.006/.007/.008/.009/.010/.011/.012/.013/.014/.015/.016/.017/.018/.019/.020/...

£9.41 exc vat

£11.29 inc vat

1/4" AF IMPERIAL DEEP SOCKET SET 9PC

TOOL27

1/4" 6 point deep AF/Imperial Socket set

Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

£12.08 exc vat

£14.50 inc vat

FLYWHEEL LOCKING TOOL

TOOL25

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

£19.50 exc vat

£23.40 inc vat

RED RUBBER GREASE 500g

DEP74500

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

£13.50 exc vat

£16.20 inc vat

CASTROL CLASSIC OIL PUMP CAN

J106

Classic Castrol oil can with flexible spout and thumb pump.

£9.69 exc vat

£11.63 inc vat

1/2" HEX KEY SOCKET FOR CRANK BOLT

TOOL22

1/2" hex key socket needed when using our upgraded crank pulley bolt C-AHT147, 1/2" drive.

£3.00 exc vat

£3.60 inc vat

COPPER GREASE high melting point 500g

DEP73500

Copper Grease/Anti-Seize high melting point assembly grease supplied in 500g tub, suitable for jobs such as lubricating bolt threads, essential for any restoration project!

£13.13 exc vat

£15.76 inc vat

SPECIAL WASHER FOR SEATING CV AND WHEEL BEARINGS S...

TOOL21

CV fitting tool, designed to assist with the correct fitting of CV joints, wheel bearings or drive flanges, as specified in the Haynes workshop manual. The wheel bearing should be torqued to the specified setting using this washer, and then removed a...

£4.50 exc vat

£5.40 inc vat

A SERIES CRANKSHAFT TAP 5/8" X 16 TPI WHITWORTH TH...

TOOL20

A series crankshaft tap in 5/8 x 16 tpi Whitworth form, used for both ends of the crankshaft.

£30.00 exc vat

£36.00 inc vat

SPARK PLUG SOCKET 21MM

TOOL18

Sykes Pickavent 21mm spark plug socket, 3/8" Drive

£3.60 exc vat

£4.32 inc vat

GEARBOX SELECTOR ROLL PIN PUNCH TOOL

TOOL17

Roll pin punch for removing RPS1416 roll pin from the gear selector mechanism.

£2.50 exc vat

£3.00 inc vat

MOLY GREASE (SUITABLE FOR CV JOINTS) 500g

DEP72500

Molybdenum Grease supplied in a 500g tub, suitable for the lubrication of CV joints and any other homokinetic joints.

£6.30 exc vat

£7.56 inc vat

OIL 20/50 CLASSIC FOR ENGINES AND GEARBOX COMBINED...

MILLERS001

Mineral oil especially formulated for the combined engine and gearbox such as the mini, but for better gearchange etc use MILERS002 except on rebuilt engines where pistons must be allowed to bed in using non synthetic oil. 5 litre bottle.

Se...

£27.00 exc vat

£32.40 inc vat

SUSPENSION CONE COMPRESSOR TOOL METRIC THREAD ONLY

TOOL07

This new type suspension cone tool for removing or refitting the rubber suspension cone is METRIC thread only and improved by using a hex(allen)key to screw in and hold the centre spindle. There cannot be many cars left out there with the AF type th...

£26.65 exc vat

£31.98 inc vat

CARB BALANCER TOOL

MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

£28.50 exc vat

£34.20 inc vat

CARB SU ADJUSTING SPANNER

CA39

Spanner for adjusting the jet on silver coloured original jets on HS type carbs

short handle to enable use in tight places such as a mini engine bay.

WILL NOT FIT LATEST BRASS TYPE ADJUSTER NUTS AS FITTED TO REPLACEMENT CARBS SINCE ...

£5.48 exc vat

£6.58 inc vat

Rear Wheel Cylinder Circlip Tool