OIL 20/50 CLASSIC FOR ENGINES AND GEARBOX COMBINED...
MILLERS001

£27.00 exc vat

£32.40 inc vat

In stockIn stock
Mineral oil especially formulated for the combined engine and gearbox such as the mini, but for better gearchange etc use MILERS002 except on rebuilt engines where pistons must be allowed to bed in using non synthetic oil. 5 litre bottle.

Se...

£27.00 exc vat

£32.40 inc vat

In stockIn stock

Recommended usage 1 x MILLERS001 to fit one mini.

Recommended products

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.

Genuine Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014 when parts quality selection changed.

Same manufacturer and item as GFE443 but with our livery on so you know you are g...

Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...

We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.



Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...

Alternative products

Mini Spares produced 20w50 mineral oil-everbody loves this great value oil



Mini Spares own branded oil with a high amount of Zinc/ZDDP (1300ppm) compared to Castrol equivalent 800PPM- this oil is as close as we could get to the oil...

ESPECIALLY FOR MINIS

This 20-50w semi synthetic oil is produced especially for minis where it needs to lubricate both engine and gearbox parts giving the neccessary coating and protection. Semi synthetic has a long life to 100c with maximum ...

Kit products
People also bought products

Classic Castrol 20W/50 oil supplied in retro style 1 litre metal tin.

I gallon 20/50 classic oil with original look jug from the 60s

ESPECIALLY FOR MINIS

This 20-50w semi synthetic oil is produced especially for minis where it needs to lubricate both engine and gearbox parts giving the neccessary coating and protection. Semi synthetic has a long life to 100c with maximum ...

Mini Spares produced 20w50 mineral oil-everbody loves this great value oil



Mini Spares own branded oil with a high amount of Zinc/ZDDP (1300ppm) compared to Castrol equivalent 800PPM- this oil is as close as we could get to the oil...

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

This is the large seal for the early type oil filter assembly pre spin on type.

Replacement O ring for the Minispares range of chrome dipticks

We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.



Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

Metric & Imperial offset feeler gauge set, ideal for setting tappet clearnace, primary gear end float etc. Offset for ease of use.





Imperial: .005/.006/.007/.008/.009/.010/.011/.012/.013/.014/.015/.016/.017/.018/.019/.020/...

Imperial & Metric spanner set ideal for completing most tasks on your classic Mini, these are mirror polished spanners.



Contents: Bi Hex x Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, ...

3/8" 6 point deep AF/Imperial Socket set



Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

3/8" 6 point shallow AF/Imperial Socket set



Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

1/4" 6 point deep AF/Imperial Socket set



Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

1/4" 6 point Shallow AF/Imperial Socket set



Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

Classic Castrol oil can with flexible spout and thumb pump.