£2.70 exc vat
£3.24 inc vat
In stock
Same manufacturer and item as GFE443 but with our livery on so you know you are g...
£2.70 exc vat
£3.24 inc vat
In stockRecommended usage 1 x MSF166 to fit one mini.
Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.
We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.
Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...
Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.
Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.
A kit to convert the early style cartridge oil filter to the later style spin on filter.
Oil filter for twin point injection cars where it screws directly into the block.
See GFE210 for shorter filter when optional oil cooler fitted or access tight through other modifications.
A kit to convert the early style cartridge oil filter to the later style spin on filter.
This is the large seal for the early type oil filter assembly pre spin on type.
MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...
Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...
Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014. Original filter for twin point injection cars where it screws directly into the block.
See GFE210 for shorter fil...
Short oil filter for MPI when space is restricted through modification or optional oil cooler fitted
MANN supplied Filter
this short filter DOES NOT fit the MPI block. it ONLY fits the oil cooler take off
Engine flush removes sludge and other unwanted deposits from oil galleries before new clean oil is added meaning the oil stays cleaner between changes. One bottle treats 4-6 litres of oil.
Billet oil filter housing for engines with 12A prefix-Uses 88G402 gasket.
The original is no longer available but this is an upgraded version to stop flexing and cracking especially sort after by racers.
Should be used ...
Bock to filter union that the oil filter screws on to for 1997 twinpoint Mini's
Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of theis version is available as [l...
Original rocker cover cap without internal filter==now use 13H2296
Mini Spares produced 20w50 mineral oil-everbody loves this great value oil
Mini Spares own branded oil with a high amount of Zinc/ZDDP (1300ppm) compared to Castrol equivalent 800PPM- this oil is as close as we could get to the oil...
Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body, is used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides ma...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.