SPIN ON OIL FILTER CONVERSION KIT

A kit to convert the early style cartridge oil filter to the later style spin on filter.

£20.11 exc vat

£24.13 inc vat

VICTOR REINZ SMALL BORE HEAD GASKET

GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.

Gasket fitment. Writing side up.

£10.40 exc vat

£12.48 inc vat

PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...

AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.

this fits engines using the early egg shaped cover

This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

£24.75 exc vat

£29.70 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

ROCKER ADJUSTING NUT EN24T

C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

£2.64 exc vat

£3.17 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

£3.00 exc vat

£3.60 inc vat

USED distributor spindle pre A plus

12G4499MS

"used old"Distributor drive,all pre A Plus A series engines plus MGB.

Fitted in the engine block to drive the distributor these were made obsolete in 1988 by Rover so if you have lost yours we have a few of these used shafts to keep yo...

£24.00 exc vat

£28.80 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

£1.60 exc vat

£1.92 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

REPLACEMENT SEAL O-RING FOR MSA1134. MSA1124/5 DIP...

TRS1316

Replacement O ring for the Minispares range of chrome dipticks

£0.10 exc vat

£0.12 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

PISTON RINGS FOR EVOLUTION +60 PISTON

C-STN102-60

Race quality Single piston ring pack for Mini Spares Evolution Pistons which also fits Mega and Omega pistons. This uses 3 piece oil ring 4mm and 2 of 1.2mm compression ring--sold per piston so 4 packs required per engine

£16.00 exc vat

£19.20 inc vat

LOWER POLY STABILISER BUSH KIT

C-STR633

Stabiliser bush kit for lower engine steady

£14.28 exc vat

£17.14 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

ARP 11 STUD HEAD SET

C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

£142.50 exc vat

£171.00 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

MAINS +10 1275CC A PLUS ONLY ACL RACE

C-AEM91886-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat

BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE

C-AEB91306-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.69 exc vat

£86.03 inc vat