MINI 1275 CAM LINER SET
MS3063

£15.75 exc vat

£18.90 inc vat

In stockIn stock
You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the cam bearings? Minis have one of two sizes of cam bearings; auto blocks or 850/998 use AEC3046 those without tappet covers (ie Austin America) plus all Cooper S use AEC3063.



Note the groove in the bearing faces the oil pump.

£15.75 exc vat

£18.90 inc vat

In stockIn stock

Recommended usage 1 x MS3063 to fit one mini.

Recommended products
CAMSHAFT GEAR LOCKTAB
2A759

If you are replacing your timing chain or just doing routine maintenance a new locktab is sure to come in handy.

£0.52 exc vat

£0.62 inc vat
ENGINE BUILD LUBE TORCO.4 Oz
KCLUBE

Favoured by proffessionals for press fitting pistons, pre lubing bushes, roller and plain bearings, journals and gears. Prevents scuffing, seizure, wear, rust. Waterproof and corrosion proof.

£10.88 exc vat

£13.06 inc vat
Alternative products
CAM LINER SET 1275
ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all 1275cc blocks plus 970 and 1071 Cooper S. It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed...

£15.75 exc vat

£18.90 inc vat
People also bought products
MAINS SET 30 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...
AEM91886-30

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

£44.28 exc vat

£53.14 inc vat
CRANK THRUST WASHER SET STANDARD 998
ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat
ACL SMALL BORE ENGINE CAM LINER SET
ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat
MAINS SET 60 OVERSIZE PRE A PLUS/EARLY A+ 1275
AEM91120-60

Main bearings plus 60 oversize, 1275 2" mains. 60 thou oversize. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.



Sintered copp...

£26.25 exc vat

£31.50 inc vat
CRANK THRUST WASHER SET +0.30" 1275
ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat
MAINS +10 1275CC A PLUS ONLY ACL RACE
C-AEM91886-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat
MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE
C-AEM91886-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat
MAINS SET +10 PRE A PLUS/EARLY A+ 1275 ACL
C-AEM91120-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£74.51 exc vat

£89.41 inc vat
MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275 ACL RA...
C-AEM91120-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.78 exc vat

£86.14 inc vat
BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE
C-AEB91306-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.69 exc vat

£86.03 inc vat
BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE
C-AEB91306-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£69.06 exc vat

£82.87 inc vat
BIG ENDS +10 998/1098/970/1071/ COOPER "S" ACL RAC...
C-AEB572-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£66.27 exc vat

£79.52 inc vat
BIG ENDS SET 998/1098/970/1071/ COOPER "S" ACL RAC...
C-AEB572-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£66.27 exc vat

£79.52 inc vat
BIG END SET 60 OVERSIZE 998/1100 COOPER S
AEB572-60

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a road motor.

( Tri-Metal )

Sintered copper lead, lea...

£29.70 exc vat

£35.64 inc vat
CRANK THRUST WASHER SET STANDARD 1275
ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat
CAM LINER SET 1275
ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all 1275cc blocks plus 970 and 1071 Cooper S. It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed...

£15.75 exc vat

£18.90 inc vat
1275cc PUSH ROD - PERFORMANCE
C-AEG582

Price per rod-1275cc larger 6.35mm diameter push rod. Sold per single rod and 8 required per engine.

The larger diameter improves push rod rigidity as much as possible

without having to modify the block/head push rod ports. Thi...

£8.62 exc vat

£10.34 inc vat
BIG ENDS PLUS 40 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-40

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat
BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat