K&N HS2 CONE FILTER

For 1-1/4" carb applications, this Conical K&N filter is the answer. Fits single or dual carb setups. Sold individually.

K&N airfilters are unsurpassed in performance yet are compact in size to fit in even the most cramped quarters.

£97.49 exc vat

£116.99 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

£1.60 exc vat

£1.92 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat

BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE

C-AEB91306-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£69.06 exc vat

£82.87 inc vat

SIMPLEX TENSIONER 6 PIECE SPECIAL KIT

MSSK051EVO

Parts required to stop timing chain rattle on A plus engine using special anti stretch single row chain 3H2127EVO.Last chance to buy with the plate and pin to hold the tensioner as they are obsolete from Rover.

Fitted to 998/110...

£35.16 exc vat

£42.19 inc vat

1275 +.020 MINI SPARES EVOLUTION LIGHTWEIGHT PISTO...

C-STN100-20

Mini Spares Evolution Lightweight Performance Piston-single piston and rings.

Press fit only. Same design as C-STN103 but different manufacturer

The ultimate in lightweight die cast pistons, available in +.020, +.040 & +.060 sizes,...

£49.50 exc vat

£59.40 inc vat

SUPER WATER PUMP LESS BY PASS-3 YEAR GUARANTEE-PRE...

GWP187EVO

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

£18.75 exc vat

£22.50 inc vat

6° OFFSET WOODRUFF KEY

WKN6OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

4° OFFSET WOODRUFF KEY

WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

2° OFFSET WOODRUFF KEY

WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

3° OFFSET WOODRUFF KEY

WKN3OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

COIL BRACKET 1969-95 LUCAS TYPE COILS

12G2994

Coil bracket fitted to end stud of cylinder head,clutch end for coil to mount on as fitted 1969-94-MK3 on. This has been made to the original specification with the welded lug nuts rather than the cheaper method of having just plain holes to take a b...

£8.48 exc vat

£10.18 inc vat

BLANKING PLATE WITH 2 HOLES

ALA7530

Plate on bulkhead with 2 holes for heater hose-Minispares make 3 types

ALA7530 with holes

ALA6592 with one hole

ALA6593 blank

£6.00 exc vat

£7.20 inc vat

RIGID ENGINE TO GEARBOX HALF MOON SEAL U

CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

£4.00 exc vat

£4.80 inc vat

CYLINDER HEAD HEATER TAKE OFF OUTLET ALLOY 5/8"

12G2534ALLOY

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

£22.32 exc vat

£26.78 inc vat

MANIFOLD STAINLESS STEEL STUD AND NUT KIT

C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

£21.41 exc vat

£25.69 inc vat

VALVE STEM OIL SEAL AS USED ON MPI MODELS

LJQ101160

Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

£1.20 exc vat

£1.44 inc vat

OIL FILLER CAP RED LATE CARS/METRO

GFE6007

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

£6.80 exc vat

£8.16 inc vat