£19.43 exc vat
£23.32 inc vat
Special order
£19.43 exc vat
£23.32 inc vat
Special orderRecommended usage 1 x TRAN1057 to fit one mini.
Latest technology heavy duty helical gear set in a 5 speed gearbox.
Same as the Clubman straight cut ratios except 2nd gear which is 1.644 it has the same reduction 5th gear .865 fitted with X pin diff and 3.4 final drive
giving 2....
For all rod change gearbox mechanism housings, this as un uprated poly bush replacement for the standard rubber bonded mount
Bias spring arrangement fits the shift rod on rod change cars to "bias" the shift lever towards the 3rd gear gate. Used as standard on our 5 speed gearbox to bias the gear changes also. Tightens up all the linkage and makes gear changes feel easier a...
This pin joins the gear change rod to the selector rod, behind the diff housing
case and is usually easier to remove when reverse is selected.In reverse gear the angle is easier for removal. This is a great time to fit the Mini Spares slick ...
Metal coupling sleeve on the rod change gear change shaft extension rod under the floor, which attaches to the gearbox and held on by RPS1416 roll pin. This attaches to the rod that goes to the gearlever housing to change gears.
The gasket with the oil suction seal hole fits every mini gearbox case and the other two are for the different case shapes, one for 3 synchro case and one for 4 synchro gearbox case, so choose the one you require. For latest spec Klinger gasket set u...
Used on Rod change gearboxes and fits on the side of the gearlever alloy housing, the locknut is to prevent the switch being screwed in to far. Use 22A1613 locknut.
The actual gear lever gaiter screwed to the floor to stop draughs coming up.
for rod change gearbox models only. the metal retainer that screws to the floor to hold this gaiter is FJN10003.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.