£138.84 exc vat
£166.61 inc vat
In stock
£138.84 exc vat
£166.61 inc vat
In stockRecommended usage 1 x XPC100200PMP to fit one mini.
Courtesy switch for MPI minis from 1996 when the wiring was changed from bullet type to spade connection. This is the switch that fitted into the A post to turn the interior light on and off, the earlier switch is no longer available so if you have a...
Fitted under the bonnet on top of the servo. Relay for the engine management on twin point cars only from 1996-except for cars with air conditioning which use YWB101080.
On /Off safety swith guard and press starter switch,a red safety light --See MSA337 for extra swith and light, no wiring included.
circuit breaker for safety as required in motorsport
The switch has to be accessible from inside and outside the car.The external trigger should be located on the windscren scuttle panel -preferably the drivers side . It should be clearly ma...
This switch fits under the brake pedal on the floor. See also BMK1903A locknut for this item.
RELAY FOR STARTER, sometimes green, mainly black ...The relays for the electrics appeared from about 1985 and on all injection cars and are colour coded for ease - number YWB000430 stamped on part is different from part number.
30 amp 5 spad...
Relay for horn, front spotlamps, fogs, starter indicators, alarm, cooling fan, burlar alarm and oxygen sensor - The relays for the electrics appeared from about 1990 on and all single point injection cars and SOME are colour coded for ease-40 amp wit...
This turn signal indicator switch also includes a black button on end for the horn push and a for and aft movement for the activation of high beams. The switch is used on most MK3 Minis and can be distinguished by the use of a plug for interconnectio...
Complete assembly includes 2 shear bolts, lock, ignition switch & barrel assembly and even a spare key. Wiring loom has a four-pin plug. Fitted from MK4 mini (1976 to 1996) up to the introduction of MPI which had air bags fitted and different steerin...
Fitted from about 1989 until 1996 twin point injection cars this switch was also fitted to early metro type minis and is for horn, headlamp flash and indicators.
On /Off safety swith guard and press starter switch,plus three switches
A must for performance cars or custom cabs these switches have an LED light in the end for seeing in the dark
A must for performance cars or custom cabs these switches have an LED light in the end for seeing in the dark
This was fitted on the right hand side of the steering wheel for all overseas cars and on UK cars from 1984 -89.
Brand new and boxed. From about 1980 on (VIN#290003) the Mini wiper switch is mounted on the RH side of the steering column. This Lucas made switch also includes the washer control. It has a five wire pin plug and is easy to replace.
A must for performance cars or custom cabs these switches have an LED light in the end for seeing in the dark.
From 1996 on twin point injected cars changed the indicator and wiper stalks to accommodate the side/headlamp switch and multi speed wiper plus windscreen wash. Both switches/stalks are now only available seperately.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.