This is the lower right hand clear lens with a small red reflector fitted to all Lucas type lamps on saloon cars from 1976 on which also had rhe reverse light incorperated in it. But as they are so big they also seems to be hit first! If you have c...
This is the lower left hand clear lens with a small red reflector fitted to all Lucas type lamps on saloon cars from 1976 on which also had the reverse light incorperated into it.
For MK2 rear lamps without reverse lamp features this fits between the lamp body and the lens. Not sided.
Late model cars have these bright red auxiliary "safety lights" mounted below the rear bumper. They are to be switched on during inclement weather. Upgrade for your safety, a legal rquirement on late cars.
Rear lower left hand red lens section for MK1 mini. For the upper see 47H5355.
See also 47H5360 screw kit also for the special screws
Owing to their position on the car and chrome on metal these must be cleaned weekly. They are a direct replacement for MK3 on original number plate lamps and are less the 2 light lens, which are the same fitting for this lamp. These lamps use M4 scre...
You can scrub all you want on those old plastic tail light lens and they will never look as good as new ones. If yours is cracked or beaten then it should be a no brainer, replace them and look sharp.
Upper amber and red (indicator and stop) lens left hand for Lucas rear lamps with a built in reverse lamp. Will not fit altissimo which had a one pice complete lens, see AAU4946/7.
see XFE10006 for lamp only, less bracket. This is the complete fog lamp plus a seperate bracket for L/H/D cars, or when owners want two fitted and this one fits on the left hand side.
This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...
Rear fog lamp bracket which attaches to the rear valance. Left hand drive only
If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...
If you have rear lamps with integrated reverse lights this gasket fits between the lens and the lamp body unless you have the rare Altissimo lamps fitted in
Europe from about 1974 to early 80s.
Reverse Light
Most early Minis did not come stock with a reverse light. This hanging light from Unipart will do the job! It can be conected direct to you gearbox by using
GAE191 switch on rod change gearboxes only.
3" high ...