CON ROD BOLT 850/998/1100

12G2217

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

In stock

Standard con rod bolt for pre A Plus engines, but you can use later type rod bolts. Sold singly 8 required per engine.

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

In stock

Recommended usage 8 x 12G2217 to fit one mini.

850cc Mini & 997cc Cooper Block - Qty 8

998cc, 1100cc & 998cc Cooper - To 1980 - Qty 8

Crankshaft Identification Chart - Qty 8

Cylinder head identification numbers - Qty 8

People also bought products

SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD

ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat

BOLT 5/16" X 1" UNC SETSCREW

GFK5234

Bolt for CHM85 differential side cover. 1" long UNC useful for pre verto slave cylinder and starter bolt. Also 12A361 engine mounting bracket to alloy case.

($0.17) £0.17 exc vat

($0.20) £0.20 inc vat

SETSCREW 5/16" x 1" UNF

GFK5185

Front subframe to front teardrop mounting, clutch case to block.

Engine mounting to subframe - easier to use than the GFK5184 - 3/4" long

($0.21) £0.21 exc vat

($0.25) £0.25 inc vat

BLANKING PLUG INLET MANIFOLD & CYL HEAD

ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

($3.57) £3.57 exc vat

($4.28) £4.28 inc vat

BOLT OVERIDER AND WATER PUMP 5/16" x 1.25" LONG

SH605101

Bolt for the overider to lock plate at the back of the overider to secure it against the bumper.

Also has been used for the rear subframe trunnion 2A5819/21A2558.

Also used for the short water pump bolt.

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat

LENS SCREW - INDICATOR. FOG LAMP OR CLUBMAN SIDELI...

518868

Replacement screw for the clubman indicator/side lamp lens. 28mm long. Plus fog lamp lens. New stock is threaded along the whole length and made from stainless steel.

($0.58) £0.58 exc vat

($0.70) £0.70 inc vat

SUBFRAME TOWER BOLT DRY SUSPENSION PRE 1976

21A90

There are 2 of these long high tensile bolts in each tower of the front subframe on pre 1976 cars to hold it in place on the bulkhead. Do not forget to renew the locktab 21A1470 on these bolts. Not suitable for hydrolastic cars - see [l...

($3.68) £3.68 exc vat

($4.42) £4.42 inc vat

SETSCREW 7/16"X1.5"UNF

GHF107

($1.44) £1.44 exc vat

($1.73) £1.73 inc vat

SETSCREW BUMPER TO HANDLE BAR 1/4" x 1.5" LONG BOL...

GFK5170

Popular bumper to overider bar bolt but also fits oil pumps and gearbox cases. 1.5" long bolt.

Following are oil pump bolt lengths.

GFK5170 is 1.5" long Holburn Eaton and Sureflow.

BH604131 is 1.6250".

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

BOLT 3/8" X 1" UNF SETSCREW

GFK5191

Slave cylinder to bracket bolt on GSY118.sold singly

($0.20) £0.20 exc vat

($0.24) £0.24 inc vat

ENGINE MOUNT BRKT BOLT TO G/BOX OR HYDRO S/FRAME T...

HBZ534

There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat

SETSCREW 5/16" X 3/4" UNF

GFK5184

Engine mounting to subframe bolt (2 per mounting). Some customers find longer bolt GFK5185 easier to use (1"long).

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat

BUMPER HANDLE BAR TO OVERIDER SHORT BOLT 1/4" x 3/...

GFK5179

Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

OIL PUMP BOLT 1/4"x1.625"(1 5/8")LONG UNF

BH604131

Fits all current range of oil pumps including GLP110MS.

Holds C-AHT54 oil pick up or standard oil pipe to case on outside of gearbox case 1/4"unf bolt 1.625"long

3 lengths of oil pump bolts have been used s...

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

OIL PUMP BOLT CONCENTRIC/TURBO. SEE NOTES.

BH604141

1.75" LONG shouldered 1/4" bolt fits original concentric pumps plus some GLP139 and GLP110MS - check that you need a bolt this length as many later pumps require shorter bolts. This can of course be cut down or see [link]BH6...

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat

BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD ...

SE910161

This screw is used to hold together the 2 halves of the disc shields on all

mini front discs. Also used to retain the boot lid cable to the bootlid.

Used on various door handles and door remote link.

This 3/16"unf screw was...

($0.22) £0.22 exc vat

($0.26) £0.26 inc vat

BOLT FOR BREATHER LLC10047 UNC 5/16"X3/4"LONG

SH505061

The screw that holds the breather on the clutch case housing and is UNC thread 5/16" bolt and 3/4"long--also used on block for petrol pump

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat

STEADY ROD BOLT FOR 21A1109 BAR TO ENGINE - 1 7/8"...

BH605151

Engine stabiliser arm to block bolt. This is the longer bolt that fits the engine stabiliser rod to the cylinder block.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

RADIATOR COWL BOLT FOR LOWER BRACKET.(1PER CAR)197...

12G4270

This is the bolt that goes through ARP1073 spacer on lower radiator mount on cars from 1974 with a one piece cowl. 5/16 bolt 3.2502 long with small amount of 1" thread at end.

($1.15) £1.15 exc vat

($1.38) £1.38 inc vat

CLUTCH INSPECTION HOLE BOLT & PULLEY TO WATER PUMP

SH604041

Until the Verto/injection type cars most minis had a small inspection hole for checking timing at the top of the clutch housing. These 1/4"unf bolts 1/2" long hold on that plate but you can use shorter type SH604031 also.

Also ...

($0.38) £0.38 exc vat

($0.46) £0.46 inc vat

Contact Mini Spares

Tel:01707 607700

Email:sales@mininspares.com

Store Details:

Potters Bar|

Harrogate|

Oldbury