($1,942.35) £1.942.35 exc vat
($2,330.82) £2.330.82 inc vat
Out of stock
This is not a straight bolt on part so see C-AJJ4064 kit.
All heads are hipped and heat treated from the foundry and pressure tested before machining and again after they are assembled.
Special camshaft and modification to No 2 &4 S con rods is required, or special rods C-AEG624 are available using different bolt configuration.
Spring fitted length made to 1.375" on new heads.
Original design and tooling from Jim Whitehouse-the founder of Arden Conversions this head with tecalemet injection won class and series outright the British saloon car championship in 1969 on a 970cc Cooper S.
approx 20.5cc combustion chamber- 35.6 inlet and 30.5m exhaust approx
Not homologated for 1275GT(Iron head only)Homologated for Cooper S only
Head Gasket GEG300,BK450 or C-AHT189 cometic type must be used
($1,942.35) £1.942.35 exc vat
($2,330.82) £2.330.82 inc vat
Out of stock
3 layer steel head gasket especially suitable for full race engines up to 73.5mm
bore where it has larger bore holes and considered the ultimate head gasket.
Especially recommended for 8 port heads as it has no fire/compression ring...
EN24 Nickel Chrome moly steel studs,Competition head stud kit.
torque to 45ftlbs -no need to re-torque cometic type head gaskets.
For use on the 2012 onwards heads only.
The original Special Tuning head 8 port head by Jim Whitehouse is the ULTIMATE Push rod head for the "A"Series but is NOT A STRAIGHT BOLT ON PART.
It is supplied fully assembled with springs/top caps,Evo collets and utilizes the original siz...
Alloy 8 Port Head with 37.mm inlet valves with springs/top caps built up to take .500 thou cam lift with approximately 21cc combustion chamber.
The valve springs used are C-AEA526 with a fitted length of 1.350"
for the ...
The original Special Tuning head 8 port head by Jim Whitehouse is the ULTIMATE Push rod head for the "A"Series but is NOT A STRAIGHT BOLT ON PART.
It is supplied fully assembled with springs/top caps,Evo collets and utilizes the original siz...
Modern high lift, short duration camshafts have posed quite a few problems for the general public in recent years. Widely available performance valve springs were outdated overnight, as it became necessary to reduce spring crush. This, in turn, cause...
Original type steel 'S' competition top caps for dual springs.
If you are upgrading from single springs or just want to replace those old worn top caps, these better grade material are the best answer. Eight required per head.
Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.
Man...
This is for one inlet guide only-special stepped colsibro valve guide which retains the valve spring collar on 8 port alloy heads manufactured from July 2010.Contact our York branch for spares.
These valve guides can be fitted to earlier 8 p...
35.6mm(1.4") longer exhaust valve for the 2012 on 8 port head only
for use with special guides these are plasma heat treated to eradicate premature wear from unleaded petrol--For earlier heads see C-AHT376/7 valves.
Valves now longe...
30.5mm(1.2") longer exhaust valve for the 2012 on 8 port head only
for use with special guides these are plasma heat treated to eradicate premature wear from unleaded petrol--For earlier heads see C-AHT376/7 valves.
The valve size h...
This is for one exhaust colsibro valve guide only, stepped which retains the valve spring collar on 8 port alloy heads manufactured from July 2010.
The exhaust guide has not got a taper on port end whereas inlet has for better flow.Contact o...
New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.
These locate better in the valves and easier to control spring heights.
30.5mm(1.2") exhaust valve seat for the 2016 on 8 port from Race head number 02-040 and road head number 01-018-now fitted to 5 port race head C-AHT347RACE
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.