SUSPENSION CONE COMPRESSOR TOOL METRIC THREAD ONLY

This new type suspension cone tool for removing or refitting the rubber suspension cone is METRIC thread only and improved by using a hex(allen)key to screw in and hold the centre spindle. There cannot be many cars left out there with the AF type th...

($26.65) £26.65 exc vat

($31.98) £31.98 inc vat

RUBBER CONE SPRING GENUINE TYPE METRIC THREAD

FAM3968

Replacement rubber cone produced from original factory tooling to the original specification, complying to the original Rover/BMC drawing and manufactured in the UK and easily identifiable by having the original patent number "763432" moulded in to t...

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat

WASHER FOR SHOCK ABSORBER DAMPER

AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

($0.22) £0.22 exc vat

($0.26) £0.26 inc vat

NUT NYLOC 3/8" UNF

GFK3323

($0.12) £0.12 exc vat

($0.14) £0.14 inc vat

SUSPENSION KNUCKLE JOINT

GSV1118MS

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

($3.05) £3.05 exc vat

($3.66) £3.66 inc vat

SHOCK ABSORBER TOP FRONT BRACKET L/H

21A474

Genuine Mini Spares part improved from original for the L/H upper mounting point of your damper(shock absorber) and fit 14A6948 captive nut plates for upper bolt fixings . For lowered suspension use C-AJJ3359

($18.38) £18.38 exc vat

($22.06) £22.06 inc vat

NUT NYLOC 1/4" UNF

GFK3321

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

SHOCK ABSORBER TO UPPER ARM UPGRADED PIN

C-AJJ3361

Upgraded, lower EN8 damper pin. 3/8"unf. Sold singly

Especially useful for competion cars or street cars with lowered suspension.

Its quite a good idea to change these if they are corroded to give a better seating for your dampers.<...

($9.08) £9.08 exc vat

($10.90) £10.90 inc vat

SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS

HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

($37.65) £37.65 exc vat

($45.18) £45.18 inc vat

SHOCK ABSORBER TOP FRONT BRACKET R/H

21A471

Genuine Mini Spares part improved from original for the R/H upper mounting point of your damper(shock absorber) and fit 14A6948 captive nut plates for upper bolt fixings . For lowered suspension use C-AJJ3359

($18.38) £18.38 exc vat

($22.06) £22.06 inc vat

BOLT 1/4"x1" UNF SETSCREW

GFK5180

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER

GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat

DAMPER CAPTIVE NUT PLATE

14A6948

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

($4.14) £4.14 exc vat

($4.97) £4.97 inc vat

DAMPER BILSTEIN B4 GAS FRONT

19-221694

Standard gas filled replacement front shock absorber from Bilstein.

Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat

BALL JOINT EXTRA SHIM KIT (6 SHIMS)

2A4242

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

($2.48) £2.48 exc vat

($2.98) £2.98 inc vat

DAMPER KAYABA GAS A JUST KIT (SET OF 4)

MSSK3015

Pair of front and rear gas self adjust dampers/shock absorbers at a special price

($125.51) £125.51 exc vat

($150.61) £150.61 inc vat

SUSPENSION GEOMETRY FRONT KIT WITH MS70 AND CK17 S...

MSSK3014

Ultimate Front geometry kit which includes following parts. Adjustable tie rods and lower arms with the correct bush kits. When fitted the suspension must be properly set up. This type of kit allows you or the person setting your rear suspension up a...

($137.51) £137.51 exc vat

($165.01) £165.01 inc vat

LOWER ARMS ON CAR ADJUSTABLE WITH SPHERICAL JOINTS...

C-AJJ3360A

one piece forged lower rod end arms

unbelievably at this price they are not the welded type as sold by many of our competitors

Same as the C-AJJ3360 lower arm kit, but includes the spherical rod ends,spacers and dustcov...

($97.32) £97.32 exc vat

($116.78) £116.78 inc vat

SUSPENSION PACKAGE OF BUDGET C-STR644 AND ADJUST S...

MSSK3005A

SPECIAL OFFER OF 4 ADJUSTABLE SHOCKS AND SUSPENSION TRUMPETS. The shocks are standard height Mini Spares Spax adjustable and the adjustable trumpets are the bright metal budget type.

($328.35) £328.35 exc vat

($394.02) £394.02 inc vat

ROAD RALLY RUBBER CONE SPRING - RED SPOT

C-STR687

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

($49.60) £49.60 exc vat

($59.52) £59.52 inc vat

SUSPENSION PACKAGE OF HILOS AND GAS UPGRADE KAYABA...

MSSK3003

Gas Kayaba upgraded dampers standard road height (342001/2)and genuine Hilos.

($188.84) £188.84 exc vat

($226.61) £226.61 inc vat

GREASE NIPPLE TOP ARM (45°)

UHN445

Angled grease nipple for the upper arm on the front suspension of all Minis

importantly lubricates the upper arm spindle which so often gets neglected so check yours out and make sure this nipple is working properly. Also fits rear radius ar...

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat

LOWER ARM BUSH UPGRADE BLACK POLY TYPE

21A1882MS

Lower arm top hat bush in poly to fit all lower arms with twin taper as standard from 1965. Mini Spares have upped the game once again with these superbly finished bushes which surpass anything on the market. Fitted with a metal bush insert these are...

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat

LOWER ARM BUSH SET RACE GRADE WITH CORRECTED GEOME...

C-STR631

A must-when the castor and camber angles are changed or whenever the geometry of the car is set up you will require these bushes. They are good for cars with up to 3.5 degrees of castor angle.

From November 2003 they have been made from a s...

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat

TIE BAR BUSH KIT FOR ROAD/RALLY RACE (4 BUSHES)

C-STR627

Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.

HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.

Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...

($8.22) £8.22 exc vat

($9.86) £9.86 inc vat

LOWER ARM BUSH PRE '66 NON TAPERED HOLE TYPE

2A4294

Lower arm bush for pre 1966 cars. The lower arm had a straight hole whereas the later cars from 1966 on had a tapered hole and used 21A1882 bush with a metal sleeve in. This bush has no inner sleeve and it was discontinued in 1966. Sold ...

($4.68) £4.68 exc vat

($5.62) £5.62 inc vat

SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS

HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

($37.65) £37.65 exc vat

($45.18) £45.18 inc vat

UPPER ARM REPAIR KIT

MSK001

Mini Spares own to original drawing specifications with heat treatment correctly applied where appropiate.Lack of proper maintenance (grease) will make the pivot shaft and/or bearings wear that much faster. In severe cases the shaft may rust to the b...

($12.81) £12.81 exc vat

($15.37) £15.37 inc vat

FRONT BUMP STOP PRE '76 DRY SUSPENSION

2A4332

Minispares dry suspension type bump stop with 2 threaded retaining bolts which was replaced by a single bolt on MK4 cars from 1976 on. For 1976 on see FAM2764 or FAM2764MS. (nuts not included)

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat

SHOCK ABSORBER TO UPPER ARM UPGRADED PIN

C-AJJ3361

Upgraded, lower EN8 damper pin. 3/8"unf. Sold singly

Especially useful for competion cars or street cars with lowered suspension.

Its quite a good idea to change these if they are corroded to give a better seating for your dampers.<...

($9.08) £9.08 exc vat

($10.90) £10.90 inc vat

SUSPENSION PACKAGE OF HILO AND KYABA SELF ADJUST G...

MSSK3004

When keith Dodd bought his twin point mini he took off the original dampers

and replaced them with Kayaba Gas-a-just dampers(552018/9)plus hilos to improve road handling along with the castor, camber angle rectifications. After 11,000 perfec...

($206.84) £206.84 exc vat

($248.21) £248.21 inc vat