DAMPER STD HEIGHT FRONT GAZ ADJUSTABLE SINGLE
C-STN231

($57.00) £57.00 exc vat

($68.40) £68.40 inc vat

In stockIn stock
20 point adjustable with an end limit so you know the hardest point.

Now used by all the competitors in the Mighty Mini Race series in England. Priced Each. Fully open length from pin centres is 318mm and closed length is 222mm. Sold singly ...

($57.00) £57.00 exc vat

($68.40) £68.40 inc vat

In stockIn stock

Recommended usage 2 x C-STN231 to fit one mini.
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 2
Front Suspension - Qty 2

Recommended products

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

Alternative products

Priced Each, the closed length from pin centres is 215mm closed and open height is 292mm. operating stroke length 77mm. Sold singly but recommend fitting pairs.

Kit products

Set of genuine hilos and Gaz adjustable dampers standard ride height-for lowered ride height kit is MSSK3001 if you require the budget type adjustable suspesion see MSSK3000A

Kit using budget adjustable suspension Gaz adjustable dampers plus the machined alloy budget adjustable suspension cones.

People also bought products

Priced each. Fully open length from pin centres is 350mm and closed length is 250mm. Sold singly but recommend fitting pairs

Priced Each, the closed length from pin centres is 215mm closed and open height is 292mm. operating stroke length 77mm. Sold singly but recommend fitting pairs.

Priced Each. Fully open length from pin centres is 41.5cm and closed length is 28cm. Sold singly but recommend fitting pairs

Standard gas filled replacement front shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

Longer damper for van,estate and pick-up.Adjustable gas shocks by Spax. All shock absorbers are not created equal; the Spax brand is often considered the top of the heap! Spax shocks are Krypton gas pressurised for much longer life, and unlike stand...

A decent damper can transform a poor handling car into a joy to drive. KYB brand standard sampers are 442001 front and 442002 rear. This is the standard replacement but if you want a slight upgrade in quality of peformance s...

KYB damper, Mini rear.

KYB's gas charged "Gas-a-just" shock absorbers are an excellent upgrade for those running stock shocks on a road car. They are an excellent value for the price and offer good handling without sacrificing ride quality. ...

These superb standard replacement shock absorbers are a gas upgrade over the standard item giving a higher level of performance of 25% claimed by the manufacturer. Fully open length from pin centres is 368mm and closed length is 222mm.

These are KYB 25% upgrade on their KYB standard oil damper. Beware of others who claim 25% upgrades. They do not know what they are 25% upgrade of. We have tried and tested every shock on the market, these are the best quality and priced

da...

A decent damper can transform a poor handling car into a joy to drive. KYB brand standard dampers 442001 front and 442002 rear. See gas upgrade 342001/2 for a better performance in ride.

Fully open length from pin c...

Shock absorbers are not all equal. The Spax brand is often considered to be the top of the range. Spax dampers are Krypton gas pressurised for a much longer life and unlike standard oil filled shocks they are consistent in light to heavy use. The scr...

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.