DAMPER KONI SPORT FRONT STD HEIGHT
C-STR1675SPORT

($91.14) £91.14 exc vat

($109.37) £109.37 inc vat

Special orderSpecial order
Koni Shocks are possibly the best name in shock absorbers, and they're available for competition Minis! The sports type is 30-35% uprated for proper competition use and at this price the best available .Has 4 real points of adjustment

($91.14) £91.14 exc vat

($109.37) £109.37 inc vat

Special orderSpecial order

Recommended usage 2 x C-STR1675SPORT to fit one mini.

People also bought products
SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER
GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat
BALL JOINT EXTRA SHIM KIT (6 SHIMS)
2A4242

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

($2.48) £2.48 exc vat

($2.98) £2.98 inc vat
SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS 4 GSV...
C-STR644A

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

($69.67) £69.67 exc vat

($83.60) £83.60 inc vat
SUBFRAME TOWER IMPROVEMENT KIT FOR FRONT SUBFRAME
C-STR640A

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

($15.81) £15.81 exc vat

($18.97) £18.97 inc vat
ROAD RALLY RUBBER CONE SPRING - RED SPOT
C-STR687

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

($49.60) £49.60 exc vat

($59.52) £59.52 inc vat
GREASE NIPPLE TOP ARM (45°)
UHN445

Angled grease nipple for the upper arm on the front suspension of all Minis

importantly lubricates the upper arm spindle which so often gets neglected so check yours out and make sure this nipple is working properly. Also fits rear radius ar...

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat
LOWER ARM BUSH UPGRADE BLACK POLY TYPE
21A1882MS

Lower arm top hat bush in poly to fit all lower arms with twin taper as standard from 1965. Mini Spares have upped the game once again with these superbly finished bushes which surpass anything on the market. Fitted with a metal bush insert these are...

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
DAMPER KONI FRONT STANDARD HEIGHT SUSPENSION
C-STR1675

Koni Shocks Possibly the best name in shock absorbers, and they're available for the Mini! 20% uprated over Rover standard spec shocks and rebuildable. the adjustment is for fluid degradation rather than performance increase, Adjusting damp...

($82.77) £82.77 exc vat

($99.32) £99.32 inc vat
COMPETITION RUBBER CONE SPRING - YELLOW SPOT
C-STR688

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

($52.00) £52.00 exc vat

($62.40) £62.40 inc vat
TIE BAR BUSH KIT FOR ROAD/RALLY RACE (4 BUSHES)
C-STR627

Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.

HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.

Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...

($8.22) £8.22 exc vat

($9.86) £9.86 inc vat
SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS
HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

($37.65) £37.65 exc vat

($45.18) £45.18 inc vat
UPPER ARM REPAIR KIT
MSK001

Mini Spares own to original drawing specifications with heat treatment correctly applied where appropiate.Lack of proper maintenance (grease) will make the pivot shaft and/or bearings wear that much faster. In severe cases the shaft may rust to the b...

($12.81) £12.81 exc vat

($15.37) £15.37 inc vat
FRONT BUMP STOP PRE '76 DRY SUSPENSION
2A4332

Minispares dry suspension type bump stop with 2 threaded retaining bolts which was replaced by a single bolt on MK4 cars from 1976 on. For 1976 on see FAM2764 or FAM2764MS. (nuts not included)

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
SHOCK ABSORBER TO UPPER ARM UPGRADED PIN
C-AJJ3361

Upgraded, lower EN8 damper pin. 3/8"unf. Sold singly

Especially useful for competion cars or street cars with lowered suspension.

Its quite a good idea to change these if they are corroded to give a better seating for your dampers.<...

($9.08) £9.08 exc vat

($10.90) £10.90 inc vat
FAST ROAD LOWER ARM BUSH SET
C-STR632

Mini Spares product UK made especially for use when geometry has been changed, such as fitting adjustable tie rods or lower arms, or on any cars with corrected castor angles.

Set of 4 bushes.

These metal sleeved bushes are specially...

($10.91) £10.91 exc vat

($13.09) £13.09 inc vat
SUSPENSION KNUCKLE JOINT
GSV1118MS

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

($3.05) £3.05 exc vat

($3.66) £3.66 inc vat
LONGER COMPETITION TRACK ROD END
C-AJJ1572

Longer track rod end for running with negative camber, gives an extra 5mm of adjustment approximately over the standard item. Has consistent thread pattern and perfect design to our requirements to fits all known racks and classed as a competition tr...

($7.92) £7.92 exc vat

($9.50) £9.50 inc vat
WASHER FOR SHOCK ABSORBER DAMPER
AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

($0.22) £0.22 exc vat

($0.26) £0.26 inc vat
MINISPARES NEW SHAPE POLY BUMP STOP 1976 0N SINGLE...
FAM2764MS

Designed by Keith Dodd in poly. Single UNF fixing bolt for minis 1976 on. This shape works more progressively, make sure you fit the correct nut. Also see FAM2764 for original rubber type. Nut available separately as GFK3211...

($4.24) £4.24 exc vat

($5.09) £5.09 inc vat
SHOCK ABSORBER TOP BRACKETS FOR LOWERED SUSPENSION
C-AJJ3359

Pair of upper front damper mounting brackets, with the mounting pin both raised and moved in towards the vehicle centreline slightly to improve damper attitude. With the damper held in a more vertical position they work far more efficiently, improvin...

($31.50) £31.50 exc vat

($37.80) £37.80 inc vat