($33.02) £33.02 exc vat
($39.62) £39.62 inc vat
Out of stock
also see kits MSSK017 and MSSK017B sets which are better value.
($33.02) £33.02 exc vat
($39.62) £39.62 inc vat
Out of stock
Countersunk, crosshead screw. 1/4"unf 19mm (3/4") total length.
This screw fits the internal door hinges on wind up window cars and the striker plate on the B post.
These shims are what the factory used to fit on the other side of the hinge panel as a stiffener and sometimes even to align the doors themselves, 2.2mm thick.
Money saving car set of genuine hinges for wind up window type doors from 1970 on.
Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.
Lower internal door hinge for either side.
Fits all wind up window type doors from 1970 on.
upper door hinge l/h for wind up window type door with internal hinge 1970on
this is not a genuine part and is available in a car set kit MSSK017B
See CZH203 for genuine
Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.
Also suitable for Twin Point indicator fixings.
Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.
Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.
These shims are what the factory used to fit on the other side of the hinge panel as a stiffener and sometimes even to align the doors themselves, 2.2mm thick.
COUNTERSUNK, CROSSHEAD SCREW.31mm 1.25" TOTAL LENGTH 1/4 UNF.
Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use special screw ZCT410 with cutti...
Also se kits MSSK017 and MSSK017B
Genuine lower hinge--note, the 2 studs actually thread into the genuine hinge so can be replaced if damaged or broken
Also see kits MSSK017 and MSSK017B
Left hand top hinge -wind up window type minis from 1970 on-- note -the studs actualy thread into the genuine hinge and can be replaced with a bolt if damaged or broken
Countersunk, crosshead screw. 1/4"unf 19mm (3/4") total length.
This screw fits the internal door hinges on wind up window cars and the striker plate on the B post.
Clip to connect the door opening remote control rod plus the lock control mechanism fits on CZH640/1 and CZH616/7-- 2 per door. Also fits the wastegate on turbo models.
Mini Spares/Tex stainless steel/chrome door mirror from Tex were fitted to production minis from 1970 to 1980. These large 3" x 5.5" mirrors have also been used on many later models of the Mini, they look good and allow you to look great (rearwards) ...
This kit is required on cars from 1980 on if you wish to fit GAM215A/6A chrome
door mirrors or the Torpedo door mirrors GAM107/8. This kit includes the plastic part also which is included with the mirror when purchased new-if you only want t...
Mini Spares/Tex stainless steel/chrome door mirrors from Tex were fitted to production minis from 1970 to 1980. These large 3"x5.5" mirrors have also been used on many later models of the Mini, they look good and allow you to look great (rearwards.) ...
This kit is required on cars from 1980 on if you wish to fit GAM215A/6A chrome
door mirrors or the Torpedo door mirrors GAM107/8. This kit includes the plastic part also which is included with the mirror when purchased new-if you only want t...
For MK2/3 lamps without built in reverse lights these are the rubber seals between the lamp base and the car body, this is left hand.
Minispares original design and concept, many people have copied these but poorly, as ours are in stainless steel with nut fittings so they seal properly and cannot be stolen .If cleaned regularly they will stay smart and bright for a lifetime. Sold ...
Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.
Genuine Mini Spares quality product. For Mk1 cars use 14A8744
For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.
This seal is the best ...
Inner front R/H wing with the A panel and door stiffener check strap panel attached for ease of fitment and alignment. Always check the bonnet prop bracket location as they changed.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.