MINI CLUBMAN GRILLE BADGE
CZH651

($124.13) £124.13 exc vat

($148.96) £148.96 inc vat

In stockIn stock
Mini clubman including 1275 GT front grille badge 1969-1976 models pre facelift in 1976. With 3 pin fiing on rear this is die cast as original, polished and chromed with satin black insignia finished with electric blue metal foil inserts.

($124.13) £124.13 exc vat

($148.96) £148.96 inc vat

In stockIn stock

Recommended usage 1 x CZH651 to fit one mini.
MK1 Grilles - Qty 1

People also bought products
BADGE ITALIAN JOB FRONT BADGE
DAB101130

everybodies favourite front bonnet shield type badge fitted to the Italian Job special edition cars bonnet

($20.54) £20.54 exc vat

($24.65) £24.65 inc vat
MORRIS COOPER BONNET BADGE MKI (USES 2 X PFR108 CL...
24A72

Chrome bonnet badge as fitted to Mk1 Morris Cooper and Morris Cooper S models. Requires two fixing clips PFR108.

For small "S" badge see 24A1401.

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
BARREL LOCK RETAINING CLIP (and fixing for 24A71 b...
PFR109

Clip for Door Handle required when changing barrel set. Heavy duty round spire clip specially made for the job.

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat
RUBBER SILL MOULDING FINISHER 1993-2000
DDJ10002MS

In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.

($5.60) £5.60 exc vat

($6.72) £6.72 inc vat
HERITAGE FRONT GRILLE ASSEMBLY PRE 76 CLUBMAN
HMP441039

Really a built up half front end for the mini clubman, consists of a lower panel with headlamp panels,slam panel and stiffener between the front and slam panel,

but not inner or outer wings

($260.00) £260.00 exc vat

($312.00) £312.00 inc vat
BADGE BOOT MINI CLUBMAN REAR BADGE
CZH4153

Boot badge for the Mini clubman in black and silver 6" long by 1" high

($21.38) £21.38 exc vat

($25.66) £25.66 inc vat
BUMPER FRONT MINI CLUBMAN
CZH600

Mini Clubman front bumper, a very good copy produced from new tooling in a high quality chrome finish.

Remember-all chrome needs regular washing and cleaning as atmospheric filth contaminates modern day chrome,

For rear bumper see ...

($165.00) £165.00 exc vat

($198.00) £198.00 inc vat
GB STAINLESS STEEL BADGE SELF ADHESIVE
DAM100690MS

Stainless steel GB badge made with the correct bend and shape to fit the bootlid on minis. They stick on with top quality double sided tape which is already attached, but before fitting you must first remove any wax polish film,or road grime by eithe...

($9.50) £9.50 exc vat

($11.40) £11.40 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
FRONT SUBFRAME POLY MOUNT KIT 1976 ON
C-STR643

This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.

It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.

($16.00) £16.00 exc vat

($19.20) £19.20 inc vat
INSERT CHROME FOR WINDSCREEN ON ROLL 30 METRE
PV302

All mini windscreen and backlights have this plastic moulding in the middle 99% of the time. Chrome in colour, this is on a 30metre roll for trade use.

PW5013 is the black equivalent.

($27.60) £27.60 exc vat

($33.12) £33.12 inc vat
WASHER BOTTLE BRACKET
CZG1496

Fitted to inner wing 1990 on, plus on a bracket on the rear wheel arch in boot area for all single points onwards. For earlier cars where fitted on the bulk head you may need to put a spacer behind to make removal of bottle easier.

Original ...

($5.76) £5.76 exc vat

($6.91) £6.91 inc vat
BOOTLID SEAL. 1988 to 2000
CKE10018

This is the boot seal that actually fits on the car body which saved drilling holes in the bootlid. Fitted from about 1988 on.

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
BOOT HINGE GASKET LOWER
24A2176

These gaskets should be changed when replacing the hinges, this one goes between the bootlid hinge on the body, see 24A2175 also for upper on bootlid.

($0.34) £0.34 exc vat

($0.41) £0.41 inc vat
BOOT LID HINGE GASKET UPPER
24A2175

These gaskets should be changed when replacing the hinges-this one goes between the bootlid hinge on the bootlid. See also 24A2176 for gasket on body.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat
WASHER BOTTLE CAP
GWW951

The cap for GWW916 and GWW906 but also the the insert for windscreen washer bottle cap GWW952 found on GWW907 bottles 1980's early Minis.

($2.89) £2.89 exc vat

($3.47) £3.47 inc vat
NUMBER PLATE REAR MK1/2
14A6468

The MKI & MKII number plate panels 14A6468 are hinged at the top to swing out clear of the bumper when you open the boot lid. They were unavailable for years but now they're back. If you also need the hinges they are 14A6466...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
BOOT LID CABLE (SINGLE)
14A6740

These two simple cables are all that keep the boot lid from crashing down, damaging hinges, bumper and paint. When one fails we recommend replacing both to be sure of the same length. sold singly 2 required per car



37H3043 can be u...

($2.45) £2.45 exc vat

($2.94) £2.94 inc vat