GREY HEADLINING AND ROD KIT WITH SUNVISORS PRE '97
HL3035P

($277.88) £277.88 exc vat

($333.46) £333.46 inc vat

In stockIn stock
Complete headling kit with rods and rear roof to seat liners plus the sunvisors

in grey for MK3 saloons on

($277.88) £277.88 exc vat

($333.46) £333.46 inc vat

In stockIn stock

Recommended usage 1 x HL3035P to fit one mini.

Alternative products

Complete headling kit with rods and rear roof to seat liners plus the sunvisors

in white for MK3 saloons on

Kit contained products

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods

number one with red ends is EEB100060

number 2 and ...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number 1 with red ends is EEB100060

n...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods

number one with red ends is EEB100060

number 2 and ...

A car set of 4 special plastic clips and screws to hold in the sunvisors from december 1965 on SV2016P, SV2016W and SV2017P, SV2017W. For use on visors from 1965 that have a hinge either end.

Plain grey aftermarket sun visor for Mk3 models 1970-77 and 1992-96 which were originally thinner than Mk1 for safety crushing requirements-Will fit any mini from December 1965. Check out the special clips to hold these visors as they are sold sepera...

Grey with mirror fitted aftermarket sun visor for Mk3 models 1970-77 and 1992-96 which were thinner than pre 1965 for safety crash requirements. Check out the special clips to hold these visors as they are sold seperately in car sets only as [link]SV...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number one with red ends is EEB100060.

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number 1 with red ends is EEB100060

n...

Fitted 1969-77 and 1992-96 originally and white from 1970-96 so see PAM5401BLACK and PAM5401AP. C posts trims changed with MPI or Heritage shells.

These headlinings are held in by different shape/length rods which a...

People also bought products

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

Complete headling kit with rods and rear roof to seat liners plus the sunvisors

in white for MK3 saloons on

Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow

number 1 with red ends is EEB100060

number 2 and 3 is white ends are both EEB100070

number 4 with black ends is EEB100080
...

A car set of 4 special plastic clips and screws to hold in the sunvisors from december 1965 on SV2016P, SV2016W and SV2017P, SV2017W. For use on visors from 1965 that have a hinge either end.

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

This universal trim clip with smaller D shape and exta short claws section is for rear seat and for headlings. For MK1/2 minis and Traveller/Estate versions there are 25 and MK3 on there are 13.

For the clip with a larger D and claw spike se...

bracket for boot board R/H on 7.7 gallon tank and on both sides for 5.5 gallon tank when 165 tyres fitted

Ideal for solving the problem of fitting extra speaker's, this speaker board is simple to fit, and well finished speaker holes are oval 6"x9"

Full carpet boot liner kit, completely lines the inside of the boot area.



Not suitable for MPI minis.

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

127cm long and 43cm wide this is enough leather cloth trim that fitted S and deluxe models on the upper and lower facia plus the winscreen A posts. Fitting instructions are included but no glue.

Original Autin emblem stick on logo for use on gearlever knobs and key fobs sold by us. About 27.4mm wide.

MK1/2 style pattern door and rear quarter black vinyl trim kit for MK3 on

These are the 4 major parts that can give your car a fresh look- only fits wind up window type doors as fitted to MK3 range mid 1973 on , without ash tray facility in...

Uses ADU8081 screw and YXX3200PA cover. With a spring loasded winder knob this handle was fitted to later cars as a safety requirement. Fitment was from 1983 but fully introduced in 1984

Vinyl covered 9 piece dove grey interior trim kit.

This kit is for wind up window type doors,for MK3 saloons 1974 onwards with inertia seat belts and contains 2 door trims,2 rear quarter trims,rear parcel shelf,2 rear glove box trims and 2 r...

Reproduction gear lever gaiter for all remote control type gearboxes with the short gear lever by the driver's seat. The metal retainer for this gaiter is 14A9942. These were fitted until the introduction of the rod change type [link]CZH...

Vinyl covered 9 piece black interior trim kit

This kit is for wind up window type doors,for MK3 saloons 1973 onwards (except Cooper S) and contains 2 door trims,2 rear quarter trims,rear parcel shelf,2 rear glove box trims and 2 rear wheel a...

Mk1/2 style pattern door and rear quarter grey vinyl trim kit

These are the 4 major parts that can give your car a fresh look- only fits wind up widow type doors as fitted to MK3 range mid 1973 , without ash tray facility in rear glove box