DOOR OPENING HANDLE GREY PLASTIC
JPC8387LG

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat

In stockIn stock
This plastic handle fitted any wind up window cars up to the introduction of the twin points, which then changed and the handle fitted from 1996 on is now obsolete.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat

In stockIn stock

Recommended usage 1 x JPC8387LG to fit one mini.

People also bought products
DOOR CARDS PAIR 1976-1980 BLACK
DP3048A

Door cards, pair 1976-1980 black.

($84.54) £84.54 exc vat

($101.45) £101.45 inc vat
POLISHED ALLOY DOOR PULL HANDLES - PAIR
MSA1132

High quality, polished alloy door pull handles.

These aluminum handles will wind up window cars and they won't snap off like the original plastic ones

For matching window winders see MSA1130.

See MSA1129 for...

($13.02) £13.02 exc vat

($15.62) £15.62 inc vat
MINI WINDER HANDLE BLACK SPRING LOADED KNOB 1985 O...
YXX3199PA

Uses ADU8081 screw and YXX3200PA cover. With a spring loasded winder knob this handle was fitted to later cars as a safety requirement. Fitment was from 1983 but fully introduced in 1984

($6.67) £6.67 exc vat

($8.00) £8.00 inc vat
WINDOW WINDER HANDLE
CZA7109

Fitted on cars up to about 1982 approximately before spring type knob on handle was introduced for safety homologation YXX3199PA.

The screw this CZA7109 handle is ZKC3317.

($5.16) £5.16 exc vat

($6.19) £6.19 inc vat
DOOR HANDLE CHROME WINDOW WINDER HANDLE SINGLE
G282

If you drive your MINI/MGB often then you know that the standard plastic window winder handles are prone to breaking. These chrome metal handles are somewhat stronger and look great alongside the other chrome trim in the car's interior. Next time ...

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
WINDOW WINDER HANDLE BEZEL BLACK SINGLE
CZH701PA

plastic bezel that sits behind window winder handle.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
SUNVISOR WHITE WITH WHITE BACKING
SV2016WW

Plain white with white backing aftermarket sun visor as fitted to Mk3 models 1977-92 which were thinner than Mk1 for safety crushing requirements. Although not standard for earlier models will fit cars from December 1965. Check out the special clips ...

($40.44) £40.44 exc vat

($48.53) £48.53 inc vat
PLASTIC NUT ON DOOR FIXINGS
GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat
DOOR HANDLE PULL MK3 to 1983
CZH762

Plastic interior door pull handle fitted to Mk3 cars until approx 1983.

The chrome boss at either end CZH763 are no longer available.



Rovers last offering was in fact a GLZ118 for 1100/1300 rang...

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
STICK ON EMBLEM GT FOR GEAR KNOB
MSA2006

GT emblem stick on logo for use on gearlever knobs and key fobs sold by us.

about 27.4mm wide, please note these are now black and silver not black and gold.

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
SUNVISOR BRACKET KIT-CAR SET.1965on
SV2021

A car set of 4 special plastic clips and screws to hold in the sunvisors from december 1965 on SV2016P, SV2016W and SV2017P, SV2017W. For use on visors from 1965 that have a hinge either end.

($22.14) £22.14 exc vat

($26.57) £26.57 inc vat
HAZARD WARNING SWITCH
YUF101660

HAZARD WARNING SWITCH, PIN TYPE CONNECTORS. MK4 FROM 1976. 3.1cm tall.

($8.50) £8.50 exc vat

($10.20) £10.20 inc vat
HEADLINING ROD WHITE ENDS
EEB100070

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods

number one with red ends is EEB100060

number 2 and ...

($9.50) £9.50 exc vat

($11.40) £11.40 inc vat
HEADLINING ROD RED ENDS
EEB100060

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number 1 with red ends is EEB100060

n...

($9.50) £9.50 exc vat

($11.40) £11.40 inc vat
MINI REAR STATIC 3 POINT BELT IN BLACK
MSSB1113

Rear 3 point fitting static seatbelt

($20.00) £20.00 exc vat

($24.00) £24.00 inc vat
MINISPARES BLACK INERTIA FRONT SEAT BELT
MSSB1111

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...

($28.68) £28.68 exc vat

($34.42) £34.42 inc vat
MIRROR HEAD ROUNDED COLLAR-GREY
47H9649

Collar for the mirror in grey with a rounded shape as opposed to the grey pointed type as fitted to complete mirror 24A1750

The Light grey plastic 6" mirror as fitted from 1964 - 1970.

The first 6" light grey plastic m...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
MIRROR INTERIOR GREY 1964-75
24A1750

Light grey plastic 6" mirror fitted by BMC as standard from October 1964-69.

The first light grey plastic 6" mirror with a twin ball stem and black sucker was patented in 1962 but not fitted until October 1964. At the end of 1965 the twin ba...

($24.50) £24.50 exc vat

($29.40) £29.40 inc vat
CLIP FOR 14A8009 MOULDING
14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat
DOOR PULL HANDLE 1100
GLZ118

Interior door pull handle with chrome end pieces, different to the mini but was offered by Rover as a replacement until we showed them the difference.

Originally fitted to MGB and the Austin 1100/1300 range it has 120mm bolt hole centre spac...

($5.76) £5.76 exc vat

($6.91) £6.91 inc vat