LAMP KIT OF 2 BLACK SPOTLAMPS WITH STAINLESS BRACK...
MONTE2

($45.74) £45.74 exc vat

($54.89) £54.89 inc vat

In stockIn stock
Kit consisting of LA1009 halogen driving lamps approx 170mm wide by 58mm deep with 2 stainless steel brackets.

($45.74) £45.74 exc vat

($54.89) £54.89 inc vat

In stockIn stock

Recommended usage 1 x MONTE2 to fit one mini.

Recommended products

You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

Alternative products

Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.

One pair of S6007 halogen driving lamps 135mm wide by 35mm deep approximately plus a pair of XBU10046 stainless steel brackets. The MONTE3 kit is double these parts.

Kit contained products

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...

People also bought products

NOW N.L.A was the lamp only less wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.

(number on lens 048025 )

150mm diameter with lugs at top and botton which means it will not fit our...

Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...

One pair of S6007 halogen driving lamps 135mm wide by 35mm deep approximately plus a pair of XBU10046 stainless steel brackets. The MONTE3 kit is double these parts.

Copies of the originals in vinyl

Incorperating the original small clear window to show if the lamp remains switched on.

Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...

Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...

You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

This bracket is required to re-locate standard fitment fog lamps on R/H/D cars when fitting corner bars and overiders to the rear bumper.

This is known as a metalastic type bush as it is metal on the outside and inside with a layer of rubber between. Used on the rear rod change gearbox as a stabiliser bush for the rod change it is also used on our rear anti roll bar kits where appropri...

Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.

Copies of the originals in vinyl

Incorperating the original small clear window to show if the lamp remains switched on.

Copies of the originals in vinyl

Incorperating the original small clear window to show if the lamp remains switched on.

Reverse Light

Most early Minis did not come stock with a reverse light. This hanging light from Unipart will do the job! It can be conected direct to you gearbox by using

GAE191 switch on rod change gearboxes only.

3" high ...

Rear fog lamp bracket which attaches to the rear valance. Left hand drive only

If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...

One pair of plastic covers to go over your original Rover spotlamps with Mini

winged motif(BMW trade mark)

This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...

One pair of plastic covers to go over your original Rover spotlamps with Cooper laurel motif.