£48.05 exc vat
£57.66 inc vat
In stock
Incorperating the original small clear window to show if the lamp remains switched on.
£48.05 exc vat
£57.66 inc vat
In stockRecommended usage 2 x MSL2010 to fit one mini.
NOW N.L.A was the lamp only less wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.
(number on lens 048025 )
150mm diameter with lugs at top and botton which means it will not fit our...
Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...
Kit consisting of LA1009 halogen driving lamps approx 170mm wide by 58mm deep with 2 stainless steel brackets.
Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...
You should always use this kit for fitting any auxiliary spot or fog lamps.
Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.
Please note, SPI and MPI cars have this facility built as standard safety ...
This bracket is required to re-locate standard fitment fog lamps on R/H/D cars when fitting corner bars and overiders to the rear bumper.
Copies of the originals in vinyl
Incorperating the original small clear window to show if the lamp remains switched on.
Copies of the originals in vinyl
Incorperating the original small clear window to show if the lamp remains switched on.
Copy of the original heavy duty works lamp bar with all fittings but now in stainless steel for longevity.This type was used on LBL66D on the 1967 MONTE CARLO RALLY WITH THEIR NOW LEGAL LIGHTS Consists of a central support bracket and 2 end supports ...
Screw for holding PRC1230A to the number plate light body, 1970 onwards.
Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.
This is the plug that fits on the back of the front indicator lamps (XBD100670) on mpi models.
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
Plastic cover for JPC9849MS mirror stem--this will fit original Rover mirrors which are obsolete but is a slightly different shape
This is the L/H blanking plug in the base of the factory type fitted plastic door mirrors JPC9848...
This chrome over brass indicator lamp rim will fit any dome shape lamp lens that is retained by 2 screws, including Twin Point cars. Fits straight over the original lens and retained by the original screws. Made in brass so that a deep chrome finish ...
Plastic cover for JPC9848MS mirror stem. This will fit original Rover mirrors which are obsolete but is a slightly different shape.
This is the R/H blanking plug in the base of the factory type fitted plastic door mirrors JPC984...
Twin pin stripes for the bodysides on silver Sportspac laurel kit.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.