MKI & S SWITCH PANEL GREY
14E3386

(14,25 €) £14.25 exc vat

(17,10 €) £17.10 inc vat

In stockIn stock
MKI Switch Panel


If you are restoring your MKI Mini, you probably need one of these! Brand new, perfect reproduction. Holds ignition switch, light switch, etc.

CHROME TRIM FOR THIS IS 14A7172

(14,25 €) £14.25 exc vat

(17,10 €) £17.10 inc vat

In stockIn stock

Recommended usage 1 x 14E3386 to fit one mini.
Dash, switch panels & ashtrays - Qty 1

Recommended products

MKI Switch Bezel

Very high quality reproduction of the oblong bezel surrounding the switch panel in the dash rail.

People also bought products

Interior lamp with a black on/off switch and pointed torpedo ends.

Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.

Also there was an alternative lamp with black switch and square ends 13H192 which w...

We are now able to offer the origianl style 1 piece moulded carpets as fitted to 1997-2000 cars, these come supplied with the underlay although it is available separately under part number CK907. You could fit this carpet to any rod change Mini with ...

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

Kit of four plastic carpet protectors for where the seat frame runs. Two are flat and two are shaped to help with the shape of the tunnel. This kit includes the securing rivets. Ideal if your carpet is in good condition but the plastic plates have de...

Reproduction of the original type fireproof bulkhead sound-proofing foam insulation. These often detiriorate overtime and turn into a crumbly mess.



These are pre-cut for the mounting points and accessories that are on the bulkhead...

The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.

This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...

Chrome horn push for all Mountney classic steering wheels. Fits in 80mm hole. outer diametre is approx.88mm.

Mk1 style alloy gear knob. Will suit any Mini standatd gear lever thread.

Static 3 point fixing front seatbelt with the female fixing on a stem.

3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996


<...

3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.


...

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.



It will arrest the wearer within the same tolerances without a need for a...

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...

plastic heater knob that pushes on the end of the control lever on Mk1/2 heaters. one required per car.

Special shaped overmats for your Mini with our Mini Spare logo--one of our bset sellers. Overmats with Mini and Mini Cooper on are no longer available as BMW own the copyright and stopped our manufacture afer 15 years.

Mini Pickups had a one piece headlining frame with the canopy glued and stapled to it. Cream Crackle was used on early models and the light grey was used during the 1970's. These frames are no longer available, so make sure you keep the frame safe if...

Sun visor side clip for cars from 1964-5 with first plastic type rear view mirror and black sucker. The visor had one arm held in another plastic clip on the front which is GFK7344

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

Black door pocket liner for the R/H door which has sliding windows and external hinges