£11.91 exc vat
£14.29 inc vat
In stock
£11.91 exc vat
£14.29 inc vat
In stockRecommended usage 1 x DP3023RH to fit one mini.
These panels hold the interior door panel in place against the external door skin by bearing against the internal door frame. A pair of fillet panels will fit one door, one at the front of the pocket and one at the rear, so two pairs will be needed f...
The felt gasket that sits between the door lock and door on external hinge doors. Material could be either black or white
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...
MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.
Complete fitting kit for the door check straps on all Minis fitted with external hinges.
The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.
This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...
Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge
Mini Pickups had a one piece headlining frame with the canopy glued and stapled to it. Cream Crackle was used on early models and the light grey was used during the 1970's. These frames are no longer available, so make sure you keep the frame safe if...
These panels hold the door panels in place under tension inside the door aperture. It is not essential, but well worth replacing or renewing these in conjunction with new door panels. Sold in pairs.
Gasket for the chrome base CZH3521 to door as fitted to factory production cars from 1970 -80.
The fixing holes to door are 2.1/8"(55mm)centres apart where as late cars are only 3/4" apart.
Black door pocket liner for the L/H door which has sliding windows and external hinges
Key barrel set for Mk3 onwards door handles and boot handles.
Headlining kit including C post trims in cream crackle for 67-69 Minis which have a larger rear screen.
Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021
Mk1/2 1965 on cream crackle SV2017C
Mk3 196...
Cream colour crackle finish sun visor as fitted from december 1965 onwards. Will fit later cars if required. Drivers side without mirror.Check out the special clips to hold these visors as they are sold seperately in car sets only as SV2021<...
Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.