(25,25 €) £25.25 exc vat
(30,30 €) £30.30 inc vat
In stock
Also found intermittently on earlier cars but original grey fades into white.
The first 6" light grey plastic mirrors was patented in 1962 but were first fitted from October 1964 through 1965 and had a twin ball stem with a black rubber sucker which slid on. The twin ball stem was replaced with a 3 ball stem 24A2111 in late 1966 which had the extra ball on the stem centre where a new clear plastic sucker CRT10004 was attached.The early black sucker type was fitted to cars with sun visors that had a hinge at one end and a clip at the other.
2 styles of mirror head caps were fitted and the other style is available as
47H9649 and 47H9649WHITE if seeking your original style which have to be purchased seperately
When they introduced the sun visor with hinges at both ends in 1965 they started fitting the 3 ball mirror stem shortly afterwards.
The white mirror was introduced on production cars from MK3 1970 on but seems to be found on some earlier cars although many look white when aged and blemished by the sun. It is only when you look behind the glass of the mirror or inside of the foot where it attaches the body the true colour can be seen.
Most Leyland/BMC/Rover aftermarket mirrors were sold as grey-
see 24A1750 but both white and grey 6" mirrors appeared under this part number by Rover and then winguard made a 7.25" after market mirror in white to confuse all..Most Mk1 and Mk2 originally had grey 6" wide mirrors
(25,25 €) £25.25 exc vat
(30,30 €) £30.30 inc vat
In stockRecommended usage 1 x 24A2110 to fit one mini.
Light grey plastic 6" mirror fitted by BMC as standard from October 1964-69.
The first light grey plastic 6" mirror with a twin ball stem and black sucker was patented in 1962 but not fitted until October 1964. At the end of 1965 the twin ba...
The classic Mini phone holder with USB replaces the existing ashtray in the padded dash rail.
Key Features:
Plate is made from powder coated 3mm steel
Spring loaded clamp, hold phones between 59mm to 106...
Interior lamp with a black on/off switch and pointed torpedo ends.
Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.
Also there was an alternative lamp with black switch and square ends 13H192 which w...
We are now able to offer the origianl style 1 piece moulded carpets as fitted to 1997-2000 cars, these come supplied with the underlay although it is available separately under part number CK907. You could fit this carpet to any rod change Mini with ...
Seat front base foam replacement. Moulded foam base and only one available solely from us, has been used on 1993 to 2000 cars. Made from sample from Rover of HGA100840
Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...
Kit of four plastic carpet protectors for where the seat frame runs. Two are flat and two are shaped to help with the shape of the tunnel. This kit includes the securing rivets. Ideal if your carpet is in good condition but the plastic plates have de...
Reproduction of the original type fireproof bulkhead sound-proofing foam insulation. These often detiriorate overtime and turn into a crumbly mess.
These are pre-cut for the mounting points and accessories that are on the bulkhead...
The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.
This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...
Mk1 style alloy gear knob. Will suit any Mini standatd gear lever thread.
Static 3 point fixing front seatbelt with the female fixing on a stem.
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996
<...
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.
...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.
It will arrest the wearer within the same tolerances without a need for a...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.
It will arrest the wearer within the same tolerances without a need for a...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...
plastic heater knob that pushes on the end of the control lever on Mk1/2 heaters. one required per car.
Special shaped overmats for your Mini with our Mini Spare logo--one of our bset sellers. Overmats with Mini and Mini Cooper on are no longer available as BMW own the copyright and stopped our manufacture afer 15 years.
Sun visor side clip for cars from 1964-5 with first plastic type rear view mirror and black sucker. The visor had one arm held in another plastic clip on the front which is GFK7344
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.