LENS IN WHITE DOMED GLASS FOR INDICATOR LAMP
37H6928

(4,30 €) £4.30 exc vat

(5,16 €) £5.16 inc vat

In stockIn stock
The "Beehive" lens are used throughout the British car range! (Front and rear). Available in various colors: Clear (frosted) GLASS.


Glass "beehive" lenses, either clear or amber, were used on the front turn signals on MKI and MKII Minis. For best colour match they should be replaced in pairs. Part 37H5531 is red, 37H5520 is amber.

Sold singly 2 required per car

(4,30 €) £4.30 exc vat

(5,16 €) £5.16 inc vat

In stockIn stock

Recommended usage 2 x 37H6928 to fit one mini.
Front Lamps - Qty 2
Indicator Lamps - Qty 2

Alternative products

Domed type clear/white plastic lens for use on lamps where the lens is held in place by the rubber boot and metal rim, see 37H6928 for original glass type.Sold singly 2 required per car

People also bought products

This is the plug that fits on the back of the front indicator lamps (XBD100670) on mpi models.

Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...

Mini Clubman indicator and side light lens.



Edge of the lens are painted in Grey / Silver colour.

Colour of indicator part is light yellow.



For the orignal chrome finished edge lens with amber / orange c...

One pair of S6007 halogen driving lamps 135mm wide by 35mm deep approximately plus a pair of XBU10046 stainless steel brackets. The MONTE3 kit is double these parts.

Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.

The lens seals are available individually as XFH100460...

Kit consisting of LA1009 halogen driving lamps approx 170mm wide by 58mm deep with 2 stainless steel brackets.

Lucas clear upper lens for cars with reverse lamp built in rear lamp

with correct bulbs for the fashionable clear rear lens look. If you want to replace the lower clear lens with the red reflector because they are faded or damaged use kit MS...

Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...

Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a white plastic lens and for glass type there is only a side asnd indicator type lamp which is 2A9013 but a white glass lens is [link]3...

Copies of the originals in vinyl

Incorperating the original small clear window to show if the lamp remains switched on.

Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...

You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

White lens kit 1988 on. If your front indicator lens is held on by screws then this is the kit for your car with the side wing repeater lens also and correct orange bulbs.

If your front lens is held on by the chrome retaining ring as per all...

The front turn signals have an easy to replace chrome ring and this is the original chrome type replacement. See 7H5182MS for stainless steel.Sold singly, 2 required per car

The front turn signals have an easy to replace chrome ring but this is in stainless steel. Designed for CHM13 lamps with the plastic lens, it will need filing out to fit the glass lens units.Sold singly, 2 required per car.

This front turn lamp assembly was used on all Mkl & Mkll Saloons, all Vans and Pick-Ups. It is also an easy installation on later cars seeking that proper sixties look. Includes amber glass lens, chrome surround and rubber boot. The clips to hold thi...

Many intermittent electrical gremlins can be traced to a damaged or corroded bulb holder. This dual element socket is for combined park lamp and turn signal. The rubber boot that is supposed to protect it from corrosion is sold separately as [link]50...