INDICATOR WHITE FRONT LAMP MPI 96 ONWARDS
XBD100670

(11,25 €) £11.25 exc vat

(13,50 €) £13.50 inc vat

In stockIn stock
The outer white lens is the same as used on the conversion of the orange type used on 1986-1996 cars but the body was different on twin point cars and used a safety plug. The white lens if broken is moulded in the body but can be cleaned out completely and a new lens stuck in. New screws are XYP100310.

Often when the indicator bulb stops flashing owners suspect it is the bulb, only to find that the contacts in the base of the lamp have broken or squashed/pushed down too far. Corrosion does get the better of these lamps and pulling up the contact blades can often result in breakage so these lamps are budgeted cheaper so you can replace the whole lot. Uses GLB344 bulb not included.

(11,25 €) £11.25 exc vat

(13,50 €) £13.50 inc vat

In stockIn stock

Recommended usage 2 x XBD100670 to fit one mini.
Indicator Lamps - Qty 2

Recommended products

Special orange bulb for the FRONT indicator lamps on twin point injection cars from 1996 which have a safety loom socket fitting. Locating pins are set at 2 o clock

when viewed.

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

This is the plug that fits on the back of the front indicator lamps (XBD100670) on mpi models.

People also bought products

LED side repeater lamp for all 1986 on cars. No resisitor required

This will replace the orange lens fitted on the wing of all cars from 1986 on, fitted with an orange LED. If you need a new loom for this lamp see AFU3358. Sold singly. Does not require a resistor.

This is the plug that fits on the back of the front indicator lamps (XBD100670) on mpi models.

INDICATOR LAMP WITH WHITE LENS AND LED BULBS. sold singly,2 required per car

INDICATOR LAMP WITH ORANGE LENS AND LED BULBS. Sold singly, 2 required per car

Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.

The lens seals are available individually as XFH100460...

Lucas clear upper lens for cars with reverse lamp built in rear lamp

with correct bulbs for the fashionable clear rear lens look. If you want to replace the lower clear lens with the red reflector because they are faded or damaged use kit MS...

Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a white plastic lens and for glass type there is only a side asnd indicator type lamp which is 2A9013 but a white glass lens is [link]3...

White lens kit 1988 on. If your front indicator lens is held on by screws then this is the kit for your car with the side wing repeater lens also and correct orange bulbs.

If your front lens is held on by the chrome retaining ring as per all...

The front turn signals have an easy to replace chrome ring and this is the original chrome type replacement. See 7H5182MS for stainless steel.Sold singly, 2 required per car

The front turn signals have an easy to replace chrome ring but this is in stainless steel. Designed for CHM13 lamps with the plastic lens, it will need filing out to fit the glass lens units.Sold singly, 2 required per car.

This front turn lamp assembly was used on all Mkl & Mkll Saloons, all Vans and Pick-Ups. It is also an easy installation on later cars seeking that proper sixties look. Includes amber glass lens, chrome surround and rubber boot. The clips to hold thi...

Many intermittent electrical gremlins can be traced to a damaged or corroded bulb holder. This dual element socket is for combined park lamp and turn signal. The rubber boot that is supposed to protect it from corrosion is sold separately as [link]50...

A favourite consumable goods item used for many purposes using no 10 screw, also fits early rad cowlings that use ARA1117 screws.

Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a plastic orange lens but if you are looking for the original glass lens type see 2A9013. Fitted up to 1986 and the clips that fit the ...

Plastic bulb holder for the wing side mounted flasher on cars from 1986 on--

make sure you change the seal AFU3112 when you dismantle these to stop water corrosion. sold singly, 2 per car required.

This is the white lens kit for cars that have side repeater lens on the wing and earlier indicator lens that were held in by the chrome ring. Pre MSSK28 type

for about 1 year from 85-86 during cross over period where front indicator lamp the...

INDICATOR LAMP WITH ORANGE LENS BUT LESS BULB. Sold singly, 2 per car

This is the side repeater lamp that first appeared on the Mini Special in 1989

and on some special edition minis and the ADO16 model Austin, Morris and MG 1100/1300. The later 1986 cars had the square lamp PRC9916A fitted.