CARPET SET PRE ROD CHANGE MOULDED CARPET IN GREEN
CK960G

£232.45 exc vat

£278.94 inc vat

Special orderSpecial order
This green carpet is the correct moulded shape with insualation material attached where appropiate for that smart fit over the gearbox tunnels etc. For vehicles pre 1972 with remote or magic wand type gear levers you will therefore have to cut this hole out. Handbrake hole is ready cut with an over trimming gaiter (not the original rubber type) in place for tidier looks. Front rubber foot pads are fitted both sides and anti wear plates on the rear carpet, where the front seat frame sits on the floor are also fitted. For black see CK960A

£232.45 exc vat

£278.94 inc vat

Special orderSpecial order

Recommended usage 1 x CK960G to fit one mini.
Carpets and Sound Proofing - Qty 1

People also bought products
CARPET TRAVELLER 4 PIECE 1961-66
CK971A

This 4 piece set will fit all Travellers and Estates built before 1966 with an external petrol tank(1961 on). The kit contains a piece of carpet to fit the rear of the back seat and another piece to cover the rear floor area plus 2 side pieces. For t...

£67.98 exc vat

£81.58 inc vat
CARPET FLOOR CLIP KIT
CARPET01

This is a car set of the 8 floor stud, the triangular base and three hook clip

that originally held your carpet set in place.

Parts are available seperate as

2H8445 - CLIP

14G8736- BARB ...

£5.97 exc vat

£7.16 inc vat
MINI SPARES REAR INERTIA SEAT BELT BLACK
MSSB1109

3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.


...

£28.68 exc vat

£34.42 inc vat
SEAT BELT THREADED ANCHOR PLATE (65mm X 65mm)
681-4

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

£1.60 exc vat

£1.92 inc vat
MIRROR INTERIOR GREY 1964-75
24A1750

Light grey plastic 6" mirror fitted by BMC as standard from October 1964-69.

The first light grey plastic 6" mirror with a twin ball stem and black sucker was patented in 1962 but not fitted until October 1964. At the end of 1965 the twin ba...

£24.50 exc vat

£29.40 inc vat
REAR GLOVE BOX MOULDING RH
ALA5828

Rear Alloy Brightwork moulding for the interior rear companion box R/H.

deleted for EMB10013 plastic in 1991

£10.11 exc vat

£12.13 inc vat
CARPET STUD
ADB4811

Carpet floor stud -part of CARPET01 kit

£0.26 exc vat

£0.31 inc vat
GEAR LEVER RUBBER GAITER REMOTE TYPE
22A608

Reproduction gear lever gaiter for all remote control type gearboxes with the short gear lever by the driver's seat. The metal retainer for this gaiter is 14A9942. These were fitted until the introduction of the rod change type [link]CZH...

£23.65 exc vat

£28.38 inc vat
IGNITION BARREL MK I & II
24G1345

IGNITION BARREL TO FIT 13H337 SWITCH. MK1/2/EARLY MK3. ONE BARREL,TWO KEYS

£7.40 exc vat

£8.88 inc vat
DOOR DRAIN TUBE FOR EXTERNAL HINGE TYPE DOOR
14A7930

These special hoses are for all sliding window type doors to drain the water away from the channels. The thin end of the hose slides into the bottom tube to ensure water goes out and cannot leak into the bottom of the door and the top slides over the...

£3.75 exc vat

£4.50 inc vat
OUTER DOOR WEATHERSTRIP CLIP (SINGLE)
ADH3809

Lower moulding clip for wind up window mouldings..4 PER SIDE required but sold singly-Fits CZH1666/7 and PAM1014/5

Also used for 24A1169 glove box moulding MK1/2.

£0.40 exc vat

£0.48 inc vat
DOOR HANDLE ESCUTCHEON SEAL MK1/2 AND VANS
ADA3817

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate



is oval shaped



for boot / rear door use the hole at the rear ...

£2.25 exc vat

£2.70 inc vat
LIGHT SWITCH Mk1 Mk2 & EARLY Mk3
1H9077

Headlamp switch fits MK1/2/ earlyY MK3, Toggle type also known as bat handle type, 3 POSITION. BLADE CONNECTIONS.

£8.67 exc vat

£10.40 inc vat
CHROME ASHTRAY WITH FLAT LIFT UP LID
24A1538

Front Ashtray with Solid top as used in the top dash rail when vinyl covered, from 1961-71, Most deluxe and Cooper variants. See 8D2490 for fluted ash tray as fitted to painted top dash rail 1959-85

£14.32 exc vat

£17.18 inc vat
BULKHEAD BLANKET MK1/2
24A280

OEM firewall soundproof. These OEM style soundproof mats will fit right on any MkI/MKII Mini. Cutouts are there for the fresh air hose, hinges, wiring and wiper motor. The felt/jute is flame resistant on one side. You will notice the difference!

£14.56 exc vat

£17.47 inc vat
DOOR POCKET MOULDING
24A1169

The chrome moulding to fit the door bin on all sliding type window doors, MK1/2 and all vans/pickups. See 14A6879 for early cars with lug ends held on by screws

Use the correct single sided prong clips only ADH3809 ...

£12.50 exc vat

£15.00 inc vat
SEAT ADJUSTER BRACKETS PAIR
BG5001MS

Seat Spacers.

If you think you are too tall for the Mini. These brackets allow you to really stretch out.

£4.05 exc vat

£4.86 inc vat
GEAR LEVER KNOB MK I & II MINI
22G110

Reproductions of the original black knob with engraved white shift pattern, complete with anti-vibration rubber insert.

£9.33 exc vat

£11.20 inc vat
TREAD PLATES MK1 DOOR SEAL ALLOY KICKSTRIP PAIR
14A7270

These alloy/aluminium 'polka-dot' kick strip plates were originally fitted to the MKI Mini to protect the door seals and to hold them against the body.

£16.80 exc vat

£20.16 inc vat
REAR GLOVE BOX MOULDING LH
ALA5829

Rear Alloy Brightwork moulding for the interior rear companion box L/H.

from 1991 the metal type were replaced by EMB10013

£10.11 exc vat

£12.13 inc vat