BONNET REAR GUTTER SEAL ENGINE BAY AS FITTED FROM ...
JRC8000

£10.05 exc vat

£12.06 inc vat

In stockIn stock
This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...

£10.05 exc vat

£12.06 inc vat

In stockIn stock

Recommended usage 1 x JRC8000 to fit one mini.
Bonnet and Catches - Qty 1

People also bought products
BONNET AND BULKHEAD INSULATION PAD MK3 ON (PVC COA...
CK975A

Tough PVC sound proofing for the Bonnet and Bulkhead for all 1970 onwards mini's. Supplied with heat resistant glue for the bonnet pad

£55.50 exc vat

£66.60 inc vat
BONNET REAR GUTTER SEAL SPONGE PRE1991
14A9010MS

Called the rear bonnet seal it actually sits in the windscreen front scuttle panel on all minis up to 1991. This is the shape and size neoprene foam seal that we have found works best and has an adhesive backing to make fitting easier and less messy.

£3.25 exc vat

£3.90 inc vat
BONNET LOCK PIN .CLUBMAN only
14G2444

Bonnet lock pin for MiniClubman ,Midget,MGB a

£4.53 exc vat

£5.44 inc vat
INTERNAL BONNET RELEASE CONVERSION
GS130273

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

£19.20 exc vat

£23.04 inc vat
KNOB SEAT ADJUSTING KNOB ( ALSO BONNET SLIDER )
CZK8289

black plastic knob for seat adjust handle and on bonnet opening slider for some cars

£0.75 exc vat

£0.90 inc vat
BONNET RELEASE CABLE
FSE10020

Bonnet locking cable fitted as standard on all Twin point injection minis plus other models from 1992/3. This cable is in our kit GS130273 to fit all minis as an accessory.

£12.16 exc vat

£14.59 inc vat
QUICK RELEASE BONNET HINGE PR MK3 ONWARDS
MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

£41.23 exc vat

£49.48 inc vat
BONNET FRONT DRAIN SEAL
JRC7898

This is the seal that goes on the front of the bonnet to stop rain getting at

your electrics or causing rust and was fitted to every mini and Clubman.

£6.75 exc vat

£8.10 inc vat
BONNET PROP ROD
BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

£8.50 exc vat

£10.20 inc vat
Bonnet Prop Bracket RH for all pre injection minis
14A7806

This is the bracket on the inner wing to put your bonnet prop into when the bonnet is in the open position.

£6.00 exc vat

£7.20 inc vat
BONNET TAILORED SOUND PROOF FELT KIT
47H9615

Four tailor made felt pieces to fit in the segments between the bonnet strengthening webs to allow maximum under bonnet clearance.

See FELT860 for spray adhesive. These are about 1cm thick and the original very thick sound dea...

£25.60 exc vat

£30.72 inc vat
BONNET RUBBER BUFFER 1990 ON SELF ADHESIVE
ADU2072

Around 1990 they moved the bonnet buffers from the hole fittings on the slam panel to the sides of the bonnet opening. Common sense says these will work on any year Mini. THESE ARE STICK ON TYPES and useful for sticking anywhere on the bonnet landing...

£0.85 exc vat

£1.02 inc vat
CLUBMAN BONNET BUFFER
AAU5486A

BONNET BUFFER, 1500.

£1.47 exc vat

£1.76 inc vat
BONNET STRAP TAN ORIGINAL WORKS TYPE-SINGLE STRAP
C-AJJ3381

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather

3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...

£13.65 exc vat

£16.38 inc vat
BLACK BONNET STRIPES
MSA1121

Black bonnet stripes as applied to current model Coopers.

£8.50 exc vat

£10.20 inc vat
BONNET REAR DRAIN SEAL
JRC7008

This seal actually fits on the scuttle lip and was always included in the ignition electrics protection kits. Found on all years of cars but fitted as standard in the 80s for a while.

£14.95 exc vat

£17.94 inc vat
HEAVY DUTY BONNET PINS
C247

These heavy duty bonnet pins 4" long and 1/2" thick are favoured by competition car owners to stop the bonnet accidentally coming up. They will require drilling holes in your bonnet and sold in pairs only.

£8.40 exc vat

£10.08 inc vat
BONNET REAR GUTTER SEAL 1991 ON SELF ADHESIVE
CJE10021

From 1990 on this seal was fitted instead of 14A9010MS or JRC7008, being thinner than the previous seal it was made self adhesive and stuck to the underneath of the bonnet on the rear lip. Many cars have it fitted in the scuttle panel in...

£2.95 exc vat

£3.54 inc vat
BONNET LOCK LATCH ASSEMBLY
FPS100340

All twin point injected minis were fitted with an in-cabin cable release for the bonnet lock and this later type had a plastic insert for the bonnet pin to travel through. This is part of a complete kit we have for any minis, see GS130273

£37.80 exc vat

£45.36 inc vat
BONNET BUFFER MK1/2/3 ADU2072 ON LATER CARS
14G6856

Original type rubber buffer fits in holes on top slam panel of front panel.

Saves the bonnet vibrating and damaging paint work, later alternative is a stick on flatter type, see ADU2702.

£1.70 exc vat

£2.04 inc vat