£43.50 exc vat
£52.20 inc vat
In stock
EU label information
Rolling resistance F
Wet Grip B
Esternal Noise (dB) 70
£43.50 exc vat
£52.20 inc vat
In stockRecommended usage 4 x TYRE36 to fit one mini.
NA-1 Eco 145/70/12
– New breed fuel efficient design
– Minimized rolling resistance
– Economical driving
A winter tyre for compact and middle-class vehicles: the triple v-shaped tread design of SV-3 tyres help with drainage and the zig zag pattern helps with grip on snow, the silica compound also aids grip on icy roads.
It is advisea...
A popular inexpensive 10" tyre which will fit all widths of wheels upto 6" wide.
If you have original 3.5" wide standard wheels see TYRE24.
EU label information
Rolling resistance F
NOT crossply tyres but these radials are the only ones we know readily available at decent prices for the old 3.5"x10" steel road wheel fitted as standard to all old cars.
EU label information
Rolling resistance ...
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by air tools and 12 point sockets. This uses 17mm socket.
Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
The Mamba design goes way back to the sixties. The design is, in fact, so unique that you will only see Mambas on Minis! MAMBA logo on the centre cap. Includes special chrome sleeve nuts with a socket drive for fitting. Also see WHL1012...
4.5 x 12 Replica of the Minilite style facory fitted Cooper alloy, as fitted to Coopers from 1992 onwards, complete with non genuine nuts and centre cap. The centre cap is now for 52mm hole-see DTC100690MNH orDTC100680MNH fo...
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
A good looking quality copy wheel and priced accordingly for people wishing to change to 13" wheels. Complete with nuts and non genuine centre cap.
The centre cap is now the same 52mm hole.
Centre cap with Mini Cooper log...
This is the ultimate in a 12" wheel-the Minilife look is the standard for the Mini car. These top quality look-alike wheels were made from some of the original designs and look great. The 5" wide design works best with small flares and a set of 165/6...
The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...
Classic Mini trademark badge for classic mini winged badge about 42mm wide with the correct dome shape. This is a replacement for DTC100680MNH cap as well as
DAH100590MMM.
Vehicle centre caps and winged bonnet...
This is the ultimate in a 12" alloy wheel. The 8 spoke old original tech del Minilite look is the standard of the Classic Mini car business. These faithfull reproductions were made from the original design used by Special Tuning Department Abingdon a...
12 inch wheel by the new Tech Del Minilite company from new tooling. These include cap and the standard 60 degree chrome nuts and use LOCKNUT5 if you require Locknuts. 3.5" backspace negative offset.
Mini Cooper Laurel for the winged bonnet badges fitted from 1990 onwards DAH10036
These are also suitable for the centre caps of the Rover alloy wheels,
For the Monte Carlo, Cooper 35 and Paul Smith...
The original British made design Revolution wheel not to be confused with Revolite . ET03 offset.
No longer engraved with the word Revolution
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.