FOG LAMP REAR RIGHT HAND PLUS BRACKET
XFE10006MS

£22.00 exc vat

£26.40 inc vat

In stockIn stock
This fog lamp unit comes with a SEPERATE XFU10002 bracket for R/H fitting only, see XFE1007 for LEFT HAND FITTING SUCH AS L/H/D,

See XFE10006 for lamp only

£22.00 exc vat

£26.40 inc vat

In stockIn stock

Recommended usage 1 x XFE10006MS to fit one mini.
Spot and fog lamps - Qty 1

Recommended products
Alternative products

Late model cars have these bright red auxiliary "safety lights" mounted below the rear bumper. They are to be switched on during inclement weather. Upgrade for your safety, a legal rquirement on late cars.

This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...

Kit contained products

rear fog lamp bracket which attaches to the rear valance -right hand drive only.

If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket MSS024 which is basically the left hand dri...

This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...

Original metric fixing nut for genuine Rover sportspack arches.

People also bought products

rear stop and tail lamp for early BMc cars with red plastic lens.

Also stocked is a white lens and single filament bulb equivalent for use as reverse light on kits cars and Mokes as CHM13REVERSE.

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

Stainless steel screw kit for all mk2/3 lens to lamp body. Comes as a car set with six screws and six fibre washers.

Lucas upper lens plus gaskets for cars with built in reverse facilty in lamp

These are the upper lens in clear plastic with 2 new lens gaskets to stop water seeping into the lamps, plus the correct bulbs when you require the fashionable clea...

Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.

The lens seals are available individually as XFH100460...

Lucas clear upper lens for cars with reverse lamp built in rear lamp

with correct bulbs for the fashionable clear rear lens look. If you want to replace the lower clear lens with the red reflector because they are faded or damaged use kit MS...

Genuine L/H lamp.Beware of cheaper inferior lamps for sale.

Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp.Supplied with gaskets. Many people now change the upper lens to the more fash...

Convert your upper lens to all white but dont forget to use correct colour bulbs

for all lamps that have a built in reverse lamp.

Genuine R/H lamp. Beware of cheaper inferior lamps for sale.Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp. Supplied with gaskets. Many people now change the upper lens to the more fashionable w...

For MK2/3 lamps without built in reverse lights these are the rubber seals between the lamp base and the car body, this is left hand.

Two of these plastic lens that hold festoon bulbs (GLB239) are mounted in the metal cast number plate housing (13H6900) on all MK3 bootlids from 1970on. Sold individually with bulb LESS FIXING SCREWS.

See PMZ206 for screw replac...

RH lamp assembly MK1,this is the only quality part made in UK from original tooling unlike others available from our competitors.

The MKI Mini is the most sought after and the tail lamps are one of the most distinguishing features.

This bracket is required to re-locate standard fitment fog lamps on R/H/D cars when fitting corner bars and overiders to the rear bumper.

Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the Right hand seal between the lamp and the car body.

Chrome plastic D shape type lamp fitted to many cars in the 1960s, the mini usually had two of these in black on the rear number plate of MK1/2 minis/vans and estates.

A metal version is available as BHA4153 and 83H335<...

Original chrome metal D shape type lamp as fitted to Mk1 and Mk2 Minis. Also used on many British cars in the 1960s. A plastic version is available as BHA4154 and 83H335 for black. Has the original hexagonal nut on body whic...

Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the L/H seal between the lamp and the car body.

For MK2/3 lamps without built in reverse lights these are the rubber seals between the lamp base and the car body, this is right hand. The seal between lens and lamp is 37H6778.