(¥12) £12.05 exc vat
(¥14) £14.46 inc vat
In stock
(¥12) £12.05 exc vat
(¥14) £14.46 inc vat
In stockRecommended usage 1 x GWW1116 to fit one mini.
Rubber grommet/seal as supplied in GWW935 washer bottle, to seal to the pump.
Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.
Have yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.
Original ty...
Non return valve fitted from 1992 when the washer bottle is fitted in the boot.
Fitted in the engine compartment pre October 1988 until the introduction of GWW940 and in the boot from 1991 on. This large windshield washer plastic bottle was then moved to the boot area and mounts on the R/H rear wheel arch. Rectangu...
This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...
This is the metal bracket that holds most round shaped windscreen washer bottles from the 1960s which was fitted to MGB, Sprite and Mini but was in a black painted finish which got tatty when rusting so we made them in stainless steel for long life. ...
A pair of black wiper arm's for L/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
A pair of black wiper arm's for R/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.
This is where the wipers park on the left hand side as you sit in the car.
Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...
This is the spiral wound cable that is in the wiper rack tubes. It needs to be cut to length.
Total length uncut is 150cm.
For classic vehicles with self parking wipers.
We all love our classic vehicles and many of us use them all year round. This means facing the vagaries of the weather, and let’s face it, even summer weather is rarely as rain free as...
Smarten up your car with these functional chrome windscreen washer jets,
which have twin nozzle outlets to dispense more water. Bolts on, complete jet sold individually. Later cars with D shape holes will need filing to fit.
These u...
Chrome on metal wiper bezel kit. A nice upgrade from the black plastic bezel that your car came with! Complete kit includes a pair of chrome wiper wheel box finishers, chrome nuts and the rubber seals between the bezel and the body. (One cars worth)...
Brighten up your car with these chromed plinths for the wiper wheel box on MK3 Minis on to the very last models. Includes 8 sided nut for all MK3 cars 1970 on.
For MK1/2 see 37H6042C.
This complete kit of 11" heavy duty wiper arms, blades, jets, plugs and wiper bushes in stainless steel and chrome are for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car.
Black bushes for wiper wheelboxes. Sold as a wiper wheel box set(one above the windscreen scuttle cowl and one under the cowl), takes two sets per car.
To fit early Mk1/2 cars cut down the part that fits under the panel work part(this part h...
Minispares original design and concept, many people have copied these but poorly, as ours are in stainless steel with nut fittings so they seal properly and cannot be stolen .If cleaned regularly they will stay smart and bright for a lifetime. Sold ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.