MAGNETIC OIL TRAP WITH FILTER
HPS5

(¥41) £41.24 exc vat

(¥49) £49.49 inc vat

In stockIn stock
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of theis version is available as HPS6.

(¥41) £41.24 exc vat

(¥49) £49.49 inc vat

In stockIn stock

Recommended usage 1 x HPS5 to fit one mini.

Recommended products

Magnetic drain plug, plus added length to help gather all those metal bits between oil changes. For all manual Mini's.

Alternative products

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...

Kit contained products

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.

Gearbox oil strainer to gearbox internal case gasket and also used on the C-AHT54 special oil pick up pipe. One also sits on the outer plate held onto the gearbox outer casing by 2 screws.

People also bought products

This is the large seal for the early type oil filter assembly pre spin on type.

MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...

Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...

Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014. Original filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter fil...

Genuine Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014 when parts quality selection changed.

Same manufacturer and item as GFE443 but with our livery on so you know you are g...

Short oil filter for MPI when space is restricted through modification or optional oil cooler fitted



MANN supplied Filter



this short filter DOES NOT fit the MPI block. it ONLY fits the oil cooler take off

Engine flush removes sludge and other unwanted deposits from oil galleries before new clean oil is added meaning the oil stays cleaner between changes. One bottle treats 4-6 litres of oil.

Bock to filter union that the oil filter screws on to for 1997 twinpoint Mini's

pair of socks for rampipes on carbs. These should be fitting dry, no oil required.

Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.

Chrome pancake air filter for 1.25" SU. 5.5" diameter, offset mounting, 1" (+0.5" nuts) thick. Washable, reuseable filter element.

Many SU carb users (stock on all Spridgets) found their car equipped with pancake air cleaners. These have bee...

Minispares own 5 litres of 20W50 mineral oil, see GUL7005T plus a spin on oil filter pre 1996 from the original supplier to Rover/Unipart, see MSF166

For 1.5" carb applications, this Conical K&N filter is the answer. Fits single or dual carb setups. Sold individually.

K & N airfilters are unsurpassed in performance yet are compact in size to fit in even the most cramped quarters. These d...

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...

Just what injection engines require, this element will increase the breathing

to the engine which can only result in better performance all round. Once fitted these special elements can last nearly a life time if cleaned and oiled regularly ...

Better flowing replacement air filter for single 1.25" SU and use 2 for twin SU 1.25" carbs. Item sold per filter-one required for single HS2 carb and two for twin carb set up cars. Does not fit mk3 S air boxes as they are shallower.

Not for autos ,this kit usually gives true power gaims of upto 6BHP. For the twin point injection cars only with a twin air hoses supplied. The single point needs only 1 hose and is kit 57-0082.

Not for autos, this kit usually gives true power gaims of upto 6BHP. For the single point injection cars only with a single air hose. The twin point needs 2 hoses and is kit 57-0189.